User manual

Remove the screw from

the lamp cover.

Remove the lamp cover

(refer to the illustration).

Replace the used lamp

with a new lamp of the

same power and specifi-

cally designed for house-

hold appliances (the

maximum power is

shown on the lamp cov-

er).

Install the lamp cover.

Tighten the screw to the

lamp cover.

Connect the plug to the

mains socket.

Open the door. Make

sure that the light comes

on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installa-

tion".

3. If necessary, replace the defective door gaskets.

Contact the Service Center.

Technical data

Dimension of the recess

Height 1225 mm

Width 560 mm

Depth 550 mm

Voltage 230-240 V

Frequency 50 Hz

The technical information are situated in the rating plate

on the internal left side of the appliance and in the ener-

gy label.

Installation