Dimensions Guide

Zurn Plumbing Products Group Commercial Brass and Fixtures Operation
2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com
REV. B DWG. NO. 83071 DATE: 12/12/07 C.N. NO. 97832 PRODUCT NO. Z5665
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and
CAN/CSA B45 requirements.
Z5665
1.28 GPF Elongated, Floor Mounted, ADA
Height, EcoVantage Flush Valve Toilet System
Z5665 HET Series
• Zurn One HET Toilet System designed for optimal
performance between Zurn fixture and Zurn flush
valve to save water.
• 1.28 gpf (gallons per flush)
• 20% water savings over standard 1.6 gpf system
• Vitreous china
• Elongated front rim
• 2" fully glazed trapway
• High efficiency siphon jet flush action
• Zurn product system component compatibility and
quality assurance
• Shipping Weight: 57 lbs.
TAG
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when installed according to these
requirements.
Z5665 Series Elongated
See Zurn One Systems for suggested packages.
Engineering Specification: Z5665 AquaSense,
EcoVantage High Efficiency Toilet System
-System comes complete with exposed
ZTS6200EV high efficiency flushometer valve and
floor mounted, vitreous china toilet. The system is
designed to perform to industry standards with as
little as 1.28 gallons per flush. Valve is operated by
an infrared convergence-type proximity sensor with
smart technology, powered by a single 9 volt battery,
furnished with a vandal resistant chrome plated cast
brass valve body, chloramine resistant internal
seals, manual over ride button and reversible cover.
Complete with high pressure vacuum breaker, one
piece hex coupling nut, adjustable tailpiece, spud
coupling and flange for top spud connection. Control
stop has internal siphon-guard protection, vandal
resistant stop cap, sweat solder kit and a cast wall
flange with set screw. Vitreous china toilet is 1-1/2”
top spud with 2” fully glazed trapway and siphon jet
action. Valve and toilet are an engineered system
designed to provide optimal performance and 20%
water savings over 1.6 gpf conventional toilets.
This space is for Architectural/engineering Approval
Recommended Trim:
Z5955SS-EL Elongated, standard white, open
front toilet seat less cover with stainless steel
check hinge.
Z5972-COMB Closet bolt/wax ring kit.
Note:
To ensure system performace:
minimum running water pressure = 25 psi

Summary of content (2 pages)