Specification Sheet

AquaVantage
®
is a registered trademark of Zurn Industries, Inc.
ZURN INDUSTRIES, INC.


 COMMERCIAL BRASS OPERATION


 5900 ELWIN BUCHANAN DRIVE


 SANFORD NC 27330
Phone: [phone]


 Fax: [phone]


 World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED


 3544 Nashua Drive


 Mississauga, Ontario L4V1L2


 Phone: [phone] Fax: [phone]
Exposed ZH6000AV Model
With Hydraulic Actuation
For Water Closets
Suffix Options (Check/Specify Appropriate Options)
_____ -MB 1"[25] Metal push button Hydraulic Actuator
_____ -SW Side Wall Mounted Hydraulic Actuator
_____ -WP Wall Plate for Push Button (ZP-50)
_____ -YJ Split Ring Pipe Support
_____ -YK Solid Ring Pipe Support
_____ -YO Bumper on Angle Stop
_____ Other
This space is for Architectural/engineering Approval
Flow Options
-WS1 1.6 Gal. Low Consumption Flush
-FF 4.5 Gal. Full Flush
Standard Flush 3.5 Gallons Per Flush
Rev. C Date: 5/18/03
Dwg. No. 65398 Product No. ZH6000AV
ENGINEERING SPECIFICATION: ZURN ZH6000AV
AquaVantage
®
‘AV’ Exposed Closet Flush Valve with Hy-
draulic Actuation- Exposed, quiet diaphragm-type, chrome
plated, flushometer valve with a polished exterior and Zurn's
AquaVantage
®
TPE, chloramine resistant, dual seal diaphragm
with a clog resistant, triple filtered by-pass. The valve is com-
plete with a non-hold open type hydraulic push button actuator
that may be located up to 36"[914] (7'[2133] with -SW option)
from the valve, high back pressure vacuum breaker, one piece
hex coupling nut, adjustable tailpiece, spud coupling and flange
for top spud connection. Control stop has internal siphon-guard
protection, vandal resistant stop cap, sweat solder kit, and a
cast wall flange with set screw. Internal seals are made of
chloramine resistant materials. Electrical box supplied by oth-
ers. (see installation instructions for size and type)
AquaVantage AV Model
®



TAG