User manual

Your ZVOX Sound Base® system is equipped with a
Bluetooth® receiver that allows it to play music wire-
lessly from your smart phone, tablet, laptop computer
or other Bluetooth equipped audio devices.
•
To start the Bluetooth connection process, use the
INPUT button on your remote control (or the control
module on the front
of the Sound Base) to select the
Bluetooth input
( rllll ). Keep pushing the INPUT but-
ton until the SoundBase display reads "bLUE
."
• Now follow the directions for your Bluetooth device
to "pair" to the SoundBase. This typically involves
going to "Settings" then the "Biuetooth Settings" and
choosing the "ZVOX" listing when it appears on the
list
of available devices.
·T he "bLUE" symbol on the Sound Base display wi ll
flash during the connection process. Once the con-
nection is made the "bLUE" symbol should stop flash-
ing - and your device should indicate "Connected" by
the "ZVOX" listing.
A Sound Base can remember "pairing" with up to five
different Bluetooth devices. The system will connect
more quickly to a Bluetooth device that has previously
been paired with the system.
We strongly recommend that you have only one
Bluetooth-transmitting device operating in the same
room
as the SoundBase. Having two Bluetooth de-
vices "on" in the same room as the SoundBase can
lead to
an interrupted signal connection. Turn off Blue-
tooth transmission from other Bluetooth devices in the
same room. If your Sound Base drops a connection to
a Bluetooth device, check to see if an additional de-
vice like a phone
or tablet is present in the same room
(or even
in a nearby room ).
Using Bluetooth
wireless audio
with your ZVOX
Sound Base
system.
If you wish to connect to a different Bluetooth-
equipped device, turn Bluetooth on from the new
de vice and turn Bluetooth off on the previous device.
Troubleshooting suggestions if Bluetooth won't
connect.
• Be sure the device is within range of the Sound-
Base. The closer the device is to the Sound Base, the
better. The device may need
to be 20 feet or closer.
• Be sure the SoundBase input is set to "bLUE."
• Be sure the Bluetooth function on your device is
activated.
•
If your device indicates that it has connected - but
then disconnects, try re-connecting the device.
If repeated attempts to connect don't work, try the fol-
lowing steps:
- Turn the Sound Base off using the Power button
on
the remote control. Wait a few seconds, then turn it
back on. Repeat the Bluetooth connection process.
- If there are other Bluetooth devices nearby, tempo-
rarily de-activate their Bluetooth function.
- Clear other Bluetooth sound systems from the pair-
ing list on your Bluetooth device (implement the option
"Ignore
This Device").
- On your device, turn Bluetooth OFF, wait about 30
seconds, then turn Bluetooth back ON.
Note: Consistent Bluetooth reception can
be de-
graded by other nearby sources
of radio frequency
interference. A wifi router or radio-frequency remote
control near to the Sound Base can create interference
that reduces the effective range
of the Sound Base's
Bluetooth reception. Infrared remote controls will NOT
cause interference with the Bluetooth reception.
zvox®
Great Sound Made Simple
www.zvoxaudio.com 866-367-9869
[e-mail]
© 2014 R2 ZVOX Audio LL C. ZVOX and Sound Base are registered trademar ks of ZVOX Audio L LC . Bluetooth is a reg istered tradema rk of Bluetooth SIG.