User manual

Comcast
DVR
3-Device
Universal
Remote
Contro
l
These instructions describe how to configure your Comcast
cable
remote
to control the
volume from your
ZVOX
Audio system and not from your TV.
The
following instructions
apply
to any
TV
brand except Panasonic.
If you have a Panasonic
TV,
use the
alternate
instructions
below.
FOR ANY TV BRAND EXCEPT
PANASONIC:
Part
1:
Configure the
ZVOX system
1. Power on your
ZVOX
system.
2.
On the
ZVOX
system front panel,
press and hold
down both
MUTE and VOLUME UP
until PS-0
appears on the
display
(about 5-6 seconds}.
Release
the buttons.
The
PS-0 display will
continue flashing for about 5 seconds.
3.
While PS-0 is flashing,
repeatedly press VOLUME UP
until
it reads
"PS-5".
Wait
for
the
display
to stop flashing.
Part 2: Configure your Comcast remote
Activ
ate the
AUX
function
1.
On the Comcast remote
control,
press AUX once.
Then press and
hold SETUP until
the AUX key blinks
twice, then
release
Setup.
2. Enter
1-0-0-4-7.
The
AUX key
will blink
twice.
A
ssi
gn
ZVOX
c
ode
to the A
ux
butt
on
1. Press AUX once, then press and
hold Setup until
the AUX key
blinks
twice, then
release
Setup.
2. Enter 1-0-2-5-0. The AUX key
will blink
twice.
Lock
the volume
buttons
to the
ZVOX
1. Press AUX once. Then, press and
hold Setup until
the AUX key
blinks
twice, then
release Setup.
2. Enter
9- 9-
3 (the AUX key
blinks
twice} and then
press AUX once.
The
AUX key
will blink
twice.
3. Press the CABLE button once.
You have just
completed
the programming. Now, when
you press
VOL+, VOL-,
or
Mute, the
volume
of
the
ZVOX
system is
controlled regardless
of
whether the
Comcast remote
is
in the
TV
mode
or
Cable
mode.