User manual

Instructions
for programming your 4-device
FIOS
remote
to work with a
ZVOX
SoundBase
(RC1445302)
Please note:
This page describes
the
FIOS
4-device remote (with
DVD,
AUX
,
TV
and
STB
buttons
at
the top). The newer, two-device
FIOS
remote
(STB
and
TV
only) cannot be configured to
control
a
separate audio system.
If
you have a
ZVOX
Audio system and the 2-device
FIOS
remote,
ZVOX
Audio encourages you
to
replace
the
2-device remote
with
a
4-device
FIOS
remote.
As
of
July
2013
,
there are a number
of
sources
for
this
remote control
(search for
F/OS
4-device remote
on
the internet). This remote is
typically under
$20
These instructions describe how
to
configure your Verizon
FIOS
four
-device remote
to
control
the
volume
from your
ZVOX
Audio
Sound
Base. The main
text
instructions are
for
any
TV
brand,
except Panasonic.
The
alternate
instructions
for
Panasonic
TVs
are in
[brackets].
Part 1: Configure the ZVOX system
1. Power on your
ZVOX
system.
2.
On
the
ZVOX
system front
panel,
press and
hold
down both
MUTE
and
VOLUME
UP
until
PS
-0
appears on the
display
(
about
5-6 seconds).
Release the buttons.
The
PS
-0 display will
continue
flashing
for
about
5 seconds.
3.
While
PS
-0
is
flashing, repeatedly press
VOLUME
UP
until
it
reads
"
PS
-
5"
["PS-1"
for Panasonic
TVs].
Wait
for
the
display
to
stop
flashing.
Part 2: Configure your FIOS remote
Assign
ZVOX
code to
the
Aux button
1. Press and
hold
the
AUX
key.
2. While holding down the
AUX
key, press the
OK
key.
3.
Release both keys
simultaneously.
The Device Keys will blink
twice.
5. Enter 3
-
7
-
3
- 6
[ 1-7-8-5
for
Panasonic
TVs
].
The
AUX
key will blink
3 times.
Lock
the
volume
buttons
to
the
ZVOX
1. Press and
hold
the
STB
key.
2.
While holding down the
STB
key, press
OK.
3.
Release
both keys
simultaneously.
The Device Keys will blink
twice.
4.
Press 9
-
5
-
5. The
STB
key will blink twice.
5. Press
AUX.
The
AUX
key will blink
3 times
to
indicate success in programming.
6. Press
the
STB
key once.
Note: To return
the
FIOS
remote control
to adjusting
the
volume
of
the
TV
speakers, instead
of
the
Sound
Base, press the
TV
button in step 5.
You
have
just
completed
the programming. When
you
press the
VOL+
,
VOL-
,
or
Mute buttons on the
FIOS
remote, the volume
of
the
ZVOX
system
will
respond (and
not
the
TV
's
internal
speakers),
regardless
of
whether the
FIOS
remote is in the
TV,
DVD
or
STB
mode.