User manual

AT&T
U-Verse
Silver
Remote
How to configure your AT&T U-Verse
SILVER
remote to control
the volume output
of
a recent
ZVOX
Audio system.
OVERVIEW:
You
set the AUX device
of
the U-Verse remote control to a brand
the
ZVOX
can learn.
You
teach the
ZVOX
system to respond
to the Volume, Mute (and
Power,
if
desired).
You
adjust the
U-Verse remote so that the volume buttons always control the
ZVOX,
no matter what device is selected on the U-Verse remote.
ON YOUR
REMOTE:
1) Press
and hold the AUX button
of
the remote. While still
hold-
ing down the
AUX
button, press and hold the
OK
button.
2) Let
go
of
both buttons
at
the same time.
You
should see the
four top buttons blink twice.
3) Type
"
6002
"
into the key pad.
AUX
button should blink three
times.
You
have now programmed your remote's
AUX
device setting to
send out infrared commands the
ZVOX
system can learn.
IN
FRONT OF YOUR
ZVOX
SYSTEM:
1)
Press
the AUX button on the U-Verse remote.
2) Follow the instructions provided with the
ZVOX
system to
teach it to respond to the Volume Up, Volume Down, Mute and
Power
buttons.
3) Verify that the remote volume buttons.
LOCK
THE VOLUME
BUTTONS OF
THE
U-VERSE
REMOTE
TO
AUX
:
The following instructions are from the AT&T remote control
manual:
Vo
lume
Buttons
Always
Control
The
Same
Device
1.
Press
and hold the
STB
key on the remote control
2. While holding the STB
mode key, press the
OK
key
3. Release both the
STB
key and the OK
key
- All the mode keys will flash twice indicating programming mode
4. Enter 955 by pressing the number keys on the remote control
- The
STB
key will flash twice indicating correct entry
5.
Press
the mode key that you
want
to always send the volume
commands (AUX)
- The selected
mo
de key will flash three times indicating
suc-
cessful assignm
ent and return to normal operations.
The
volume
commands
will
now
go
to
the
selected device
no
matter
what
mode
you
are
in
.
AT&T
I
STB
KEY
<D
<D
GMt
<D
PORS
0
DElETE
CD
<D
ASC
0£.f
(!)
(!)
Jill
MHO
®
(!)
rw
WltYl
E>
SPAC(
ASPE
CT
G