ZyWALL User's Guide

Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
132
1 Click Object > User/Group > User and the Add wlan_user Edit icon.
2 Set the User Name to wlan_user. Enter (and re-enter) the user’s password. Click OK.
Figure 54 Object > User/Group > User > Add
3 Use the Add icon in the Object > User/Group > User screen to set up the remaining
user accounts in similar fashion.
6.3.2 How to Create the WLAN Interface
1 Click Network > Interface > WLAN > Add to open the WLAN Edit screen.
2 Edit this screen as follows.
A (internal) name for the WLAN interface displays. You can modify it if you want to.
The ZyWALL’s security settings are configured by zones. Select to which security zone
you want the WLAN interface to belong (the WLAN zone in this example). This
determines which security settings the ZyWALL applies to the WLAN interface.
Configure the SSID (ZYXEL_WPA in this example).
If all of your wireless clients support WPA2, select WPA2-Enterprise as the Security
Type, otherwise select WPA-Enterprise. Set the Authentication Type to Auth
Method. The ZyWALL can use its default authentication method (the local user
database) and its default certificate to authenticate the users.
Configure the interface’s IP address and set it to DHCP Server. Click OK.