ZyWALL User's Guide

Chapter 36 Addresses
ZyWALL USG 100/200 Series User’s Guide
610
The following table describes the labels in this screen. See Section 36.3.1 on page 610 for
more information as well.
36.3.1 Address Group Add/Edit Screen
The Address Group Add/Edit screen allows you to create a new address group or edit an
existing one. To access this screen, go to the Address Group screen (see Section 36.3 on page
609), and click either the Add icon or an Edit icon.
Figure 453 Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 202 Object > Address > Address Group
LABEL DESCRIPTION
# This field is a sequential value, and it is not associated with a specific address
group.
Name This field displays the name of each address group.
Description This field displays the description of each address group, if any.
Add icon This column provides icons to add, edit, and remove address groups.
To add an address group, click the Add icon at the top of the column. The Address
Group Add/Edit screen appears.
To edit an address group, click the Edit icon next to the address group. The
Address Group Add/Edit screen appears.
To delete an address group, click on the Remove icon next to the address group.
The web configurator confirms that you want to delete the address group.
Table 203 Object > Address > Address Group > Add
LABEL DESCRIPTION
Name Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Description This field displays the description of each address group, if any. You can use up to
60 characters, punctuation marks, and spaces.