ZyWALL User's Guide

Chapter 46 Reports
ZyWALL USG 100/200 Series User’s Guide
730
The following table displays the maximum number of records shown in the report, the byte
count limit, and the hit count limit.
46.3 The Session Screen
The Session screen displays information about active sessions for debugging or statistical
analysis. It is not possible to manage sessions in this screen. The following information is
displayed.
• User who started the session
• Protocol or service port used
• Source address
• Destination address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all the active sessions by user or by service, or you can filter the information
by user, protocol / service or service group, source address, and/or destination address and
view it by user.
To access this screen, login to the web configurator. When the main screen appears, click
Maintenance > Report > Session. The following screen appears.
Table 259 Maximum Values for Reports
LABEL DESCRIPTION
Maximum
Number of
Records
20
Byte Count Limit 2
64
bytes; this is just less than 17 million terabytes.
Hit Count Limit 2
64
hits; this is over 1.8 x 10
19
hits.