ZyWALL User's Guide

ZyWALL USG 100/200 Series User’s Guide
75
CHAPTER 4
Wizard Setup
4.1 Wizard Setup Overview
The web configurator's setup wizards help you configure initial configuration (Internet) and
VPN connection settings. This chapter provides information on configuring the Wizard setup
screens in the web configurator. See the feature-specific chapters in this User’s Guide for
background information.
" Use the installation wizards only for initial configuration starting from the
default configuration.
Changes you make in an installation wizard may not be applied if you have already changed
the ZyWALL’s configuration. After your initial configuration, use the interface screens to
configure interface settings.
In the ZyWALL web configurator, click the Wizard icon
to open the Wizard Setup
Welcome screen. The following summarizes the wizards you can select:
• INSTALLATION SETUP, ONE ISP
Click this link to open a wizard to set up a single Internet connection for Gigabit Ethernet
interface wan1. This wizard creates matching ISP account settings in the ZyWALL if you
use PPPoE or PPTP. See Section 4.2 on page 76.
• INSTALLATION SETUP, TWO ISP
Click this link to open a wizard to set up Internet connections for Gigabit Ethernet (ge)
interfaces wan1 and wan2. See Section 4.5 on page 92. You can connect one interface to
one ISP (or network) and connect the other to a second ISP (or network). You can use the
second WAN connection for load balancing to increase overall network throughput or as a
backup to enhance network reliability (see Section 11.1.2 on page 269 for more on load
balancing).
This wizard creates matching ISP account settings in the ZyWALL if you use PPPoE or
PPTP. This wizard also creates a WAN trunk.
• VPN SETUP
Use VPN SETUP to configure a VPN connection. See Section 4.6 on page 94.