NBG334W 802.11g Wireless Firewall Router Quick Start Guide Version 3.60 6/2007 Edition 1 DEFAULT LOGIN IP Address http://192.168.1.1 Password 1234 CONTENTS ENGLISH 2 DEUTSCH 12 ESPAÑOL 24 FRANÇAIS 36 ITALIANO 48 SVENSKA 60 Copyright © 2007. All rights reserved.
ENGLISH Overview The NBG334W is an IEEE 802.11b/g wireless broadband router or access point (AP). As a router, the NBG334W directs traffic between your wireless network and another network such as the Internet as shown below, providing services such as content filtering, bandwidth management and a firewall.
ENGLISH 1 Hardware Connections Do the following to make hardware connections for initial setup. 1 WAN Connect your modem to the WAN port using the cable that came with your modem. 2 LAN Connect your computer to a LAN port using the yellow Ethernet cable from the package. 3 POWER Connection Use the power adapter from the package to connect the POWER socket to an appropriate power source. The LEDs Look at the LEDs (lights).
ENGLISH V If an LED does not turn on, check your connections. If this doesn’t help, disconnect the NBG334W from its power source, wait for a few seconds and turn it back on. 2 Accessing the Web Configurator Default Login Information IP address http://192.168.1.1 administrator password 1234 1 Launch an Internet browser such as Internet Explorer. Enter “http://192.168.1.1” as shown below. 2 The Password window displays. Enter the password (“1234” is the default) and click Login.
ENGLISH 5 Click Go to Wizard setup to set up your NBG334W for the first time 3 Connection Wizard Setup 1 Choose your language from the drop-down list box. Click Next. 2 Click Next in the following screen to proceed with the Connection Wizard. " Enter the Internet access information exactly as given to you by your ISP in each wizard screen. Click Next to continue or click Back to return to the previous screen. Current screen information will be lost if you click Back. 3.
ENGLISH 3.2 Wireless LAN Configure your NBG334W to support a wireless network by following these steps. 1 Enter a unique Name (SSID) to identify the NBG334W on the wireless LAN. 2 Select a wireless channel. The NBG334W and other wireless clients must use the same channel. 3 Select Auto to automatically use WPA-PSK which provides a high level of security. See your User’s Guide for information on other kinds of security. Click Next. 4 Write down the security key that displays in the pop-up screen.
ENGLISH • If the wizard cannot detect a connection type, you must select your connection type from the drop-down list box in the screen below. If you do not know what connection type to use, check with your Internet Service Provider (ISP). " If you were given Internet access settings, type them in the following fields. Otherwise leave the default settings and click Next. Ethernet Connection Select Ethernet as your WAN connection type and click Next to go to section 3.4.
ENGLISH 1 Select PPTP as your WAN connection type. 2 Type a User Name and Password. • If your ISP did not assign you a fixed PPTP IP address, select Get automatically from ISP. • If your ISP assigned you a fixed PPTP IP address, select Use fixed IP address to give the NBG334W a fixed, unique PPTP IP address and subnet mask. 3 Type a PPTP Server IP Address. 4 Type a Connection ID/Name (if provided by your ISP). Click Next to go to section 3.4. 3.
ENGLISH 3.5 WAN MAC Address A MAC address is a number which uniquely identifies a device on any network. Set the WAN port’s MAC address by either using your device’s factory assigned default MAC address or cloning the MAC address of a computer on your LAN. By default, the NBG334W uses the factory assigned MAC address to identify itself on the WAN. • Select Factory Default to use the factory-assigned, default MAC address.
ENGLISH 2 Click Finish in the screen below to complete the wizard setup. 3 Congratulations. Open a web browser, such as Internet Explorer, to visit your favorite website. V If you cannot access the Internet when your computer is connected to one of the NBG334W’s LAN ports, check your connections. Then turn the NBG334W off, wait for a few seconds and turn it back on. If this doesn’t work run the wizard again, making sure you type the information correctly.
ENGLISH 2 Locate your network’s name (SSID) and click Connect to add your computer to the wireless network. 3 Follow the instructions on your wireless utility. When finished, open a browser such as Internet Explorer to surf the Internet. • For more information see the User’s Guide for a tutorial on adding a computer to your wireless network.
DEUTSCH Übersicht Der NBG334W ist ein drahtloser IEEE 802.11b/g-Breitbandrouter und Access-Point (AP). Als Router leitet der NBG334W den Datenverkehr zwischen dem Drahtlosnetzwerk und einem anderen Netzwerk wie dem Internet wie unten dargestellt weiter und bietet Dienste an wie Inhaltsfilter, Bandbreitenverwaltung und Firewall.
DEUTSCH 1 Anschließen der Hardware Bei der Erstinstallation müssen die folgenden Hardwareverbindungen hergestellt werden. 1 WAN Schließen Sie Ihr Modem mit dem mitgelieferten Kabel an den "WAN"-Anschluss an 2 LAN Schließen Sie Ihren Computer mit dem mitgelieferten Ethernet-Kabel an einen "LAN"-Anschluss an. 3 Anschließen an das Stromnetz Schließen Sie das mitgelieferte Netzkabel an den POWER-Anschluss (Netzanschluss) und an eine geeignete Stromquelle.
DEUTSCH VSollte eine LED nicht leuchten, prüfen Sie die Verbindung. Leuchtet sie auch dann nicht, trennen Sie den NBG334W von seiner Stromquelle, und schalten Sie ihn einige Sekunden später wieder an. 2 Zugriff auf den Web-Konfigurator Standard-Anmeldeinformationen IP-Adresse http://192.168.1.1 Administratorkennwort 1234 1 Starten Sie einen Internet-Browser, z. B. Internet Explorer. Geben Sie wie unten dargestellt “http://192.168.1.1” ein. 2 Das Fenster Password (Kennwort) erscheint.
DEUTSCH 5 Wenn Sie den NBG334W das erste Mal benutzen, klicken Sie auf Go Wizard setup (Zum Einrichtungsassistenten). 3 Assistent zum Einrichten der Verbindung 1 Wählen Sie aus dem Listenfeld Ihre Sprache aus. Klicken Sie auf Next (Weiter). 2 Klicken Sie auf Next (Weiter) und fahren Sie mit dem Connection Wizard (Verbindungsassistent) fort. " Geben Sie die Daten für den Internetzugriff so ein, wie Sie sie von Ihrem Internetdienstanbieter erhalten haben.
DEUTSCH 3.1 Systeminformationen Dieses Fenster ist optional. Sie können einfach auf Next (Weiter) klicken. 3.2 Wireless-LAN Führen Sie die folgenden Schritte aus, um den NBG334W so zu konfigurieren, dass er ein drahtloses Netzwerk unterstützt. 1 Geben Sie einen Namen (SSID) ein, mit dem der NBG334W im Wireless-LAN eindeutig identifiziert wird. 2 Wählen Sie einen Wireless-Kanal aus. Der NBG334W und andere Wireless-Clients müssen denselben Kanal verwenden.
DEUTSCH zugreifen zu können. Achten Sie bei diesem Schlüssel auf die Groß- und Kleinschreibung ("BCD" ist etwas anderes als "bcd"). " Notieren Sie sich den Sicherheitsschlüssel, den Namen (SSID), die Art der Sicherheit und den Kanal, da der NBG334W und andere Geräte im drahtlosen Netzwerk dieselben Einstellungen verwenden müssen. 5 Klicken Sie auf OK . 3.
DEUTSCH Wählen Sie als WAN-Verbindungstyp die Option Ethernet, und klicken Sie auf Next (Weiter), um zum nächsten Abschnitt 3.4 zu gelangen. PPPoE-Verbindung 1 Wählen Sie als WAN-Verbindungstyp PPPoE. 2 Geben Sie bei Servicename (Dienstname) einen Dienstnamen ein (falls Sie diesen von Ihrem Internetdienstanbieter erhalten haben), bei User Name (Benutzername) Ihren Benutzernamen und bei Password (Kennwort) Ihr Kennwort ein. Klicken Sie auf Next (Weiter), um zum Abschnitt 3.4 zu gelangen.
DEUTSCH 4 Geben Sie bei Connection ID/Name (Verbindungs-ID/Name) eine Verbindungs-ID oder einen Verbindungsnamen ein (wenn vorhanden). Klicken Sie auf Next (Weiter), um zum Abschnitt 3.4 zu gelangen. 3.4 WAN IP-Adresse • Wählen Sie Get automatically from your ISP (Automatisch vom Internetdienstanbieter laden), wenn Ihnen Ihr Internetdienstanbieter keine feste IP-Adresse zugewiesen hat. Klicken Sie auf Next (Weiter), um zum Abschnitt 3.5 zu gelangen.
DEUTSCH 3.5 MAC-Adresse des WAN Eine MAC-Adresse ist eine Nummer, die ein Gerät in jedem Netzwerk eindeutig identifiziert. Konfigurieren Sie die MAC-Adresse des WAN-Ports entweder mit den Standardeinstellungen oder "klonen" Sie die MAC-Adresse eines Computers Ihres LAN. Standardmäßig verwendet der NBG334W die werkseitig zugewiesene MAC-Adresse, um sich selbst im WAN zu identifizieren. • Wählen Sie Factory Default (Standardwerte), um die werkseitig festgelegte StandardMAC-Adresse zu verwenden.
DEUTSCH 2 Klicken Sie im folgenden Fenster auf Finish (Fertig stellen), um den Setup-Assistenten zu beenden. 3 Herzlichen Glückwunsch. Öffnen Sie einen Internetbrowser (z. B. Internet Explorer), um die gewünschte Website aufzurufen. V Wenn Sie keine Verbindung zum Internet herstellen können, während der Computer an einem der LAN-Anschlüsse des NBG334W angeschlossen ist, prüfen Sie die Anschlüsse. Schalten Sie dann den NBG334W aus und nach einigen Sekunden wieder an.
DEUTSCH 2 Wählen Sie Ihren Netzwerknamen (SSID), und klicken Sie auf Connect (Verbinden), um den Computer zum Drahtlosnetzwerk hinzuzufügen. 3 Führen Sie die Anweisungen des Utility-Programms für das Drahtlosnetzwerk aus. Wenn Sie diesen Vorgang abgeschlossen haben, können Sie einen Internetbrowser (z. B. Internet Explorer) öffnen und im Internet surfen. • Weitere Informationen zu einem Lernprogramm, wie Sie einen Computer an das Drahtlosnetzwerk anschließen, finden Sie im Benutzerhandbuch.
DEUTSCH 23
ESPAÑOL Vista previa El NBG334W es un router de banda ancha inalámbrico IEEE 802.11b/g o punto de acceso (PA). Como router, el NBG334W dirige el tráfico entre su red inalámbrica y otras redes como Internet como se muestra a continuación, ofreciendo servicios como filtrado de contenidos, gestión de ancho de banda y un cortafuegos.
ESPAÑOL 1 Conexiones del hardware Realice lo siguiente para crear conexiones de hardware para la configuración inicial. 1 WAN Conecte su módem al puerto WAN utilizando el cable que venía con su módem. 2 LAN Conecte su ordenador a un puerto LAN con el cable Ethernet amarillo del paquete. 3 Conexión de ALIMENTACIÓN Utilice el cable de alimentación del paquete para conectar el zócalo POWER en una fuente de alimentación apropiada. Esto también es su conexión de línea eléctrica.
ESPAÑOL VSidesconecte un LED no se enciende, compruebe sus conexiones.Si esto no ayuda, el NBG334W de su fuente de alimentación, espere unos segundos y vuelva a encenderlo. 2 Acceder al configurador Web Información de acceso predeterminada Dirección IP http://192.168.1.1 contraseña de administrador 1234 1 Abra un explorador de Internet como Internet Explorer. Escriba “http://192.168.1.1” como aparece debajo.. 2 Aparecerá la pantalla Password (Contraseña).
ESPAÑOL 5 Haga clic en Go to Wizard setup (Ir al Asistente de configuración) para configurar su NBG334W por primera vez. 3 Asistente para la configuración de la conexión 1 Elija su idioma en el cuadro de la lista desplegable. Haga clic en Next (Siguiente).. 2 .Haga clic en Next (Siguiente) en la siguiente pantalla para proceder con el Connection Wizard (Asistente para la conexión).
ESPAÑOL 3.1 Información del sistema Esta pantalla es opcional. Puede hacer clic en Next (Siguiente). 3.2 LAN inalámbrica .Configure su NBG334W para que soporte una red inalámbrica con los siguientes pasos. 1 Introduzca un Name (SSID) (Nombre (SSID)) único para identificar al NBG334W en la LAN inalámbrica. 2 Seleccione un canal inalámbrico. El NBG334W y otros clientes inalámbricos deben usar el mismo canal.
ESPAÑOL " Escriba la clave de seguridad, Name (SSID) (Nombre (SSID), Security (Seguridad) y Channel Selection (Selección del canal) para utilizarlos más tarde, ya que el NBG334W y los otros dispositivos de su red inalámbrica deberán usar la misma configuración. 5 Haga clic en OK (Aceptar) para continuar. 3.3 Conexión WAN 1 Puede necesitar esperar varios minutos mientras el asistente intenta detectar qué tipo de conexión WAN (Ethernet, PPPoE o PPTP) está utilizando.
ESPAÑOL Seleccione Ethernet como tipo de conexión WAN y haga clic en Next (Siguiente) para ir a la sección 3.4. Conexión PPPoE 1 Seleccione PPPoE como tipo de conexión WAN. 2 Escriba un Service Name (Nombre de servicio) (si su ISP le ha facilitado uno), User Name (Nombre de usuario) y Password (Contraseña). Haga clic en Next (Siguiente) para ir a la sección 3.4. Conexión PPTP 1 Seleccione PPTP como tipo de conexión WAN. 2 Escriba un User Name (Nombre de usuario) y Password (Contraseña).
ESPAÑOL 4 Escriba un Connection ID/Name (Nombre/Identificador de conexión) (si se lo ha facilitado su ISP). Haga clic en Next (Siguiente) para ir a la sección 3.4. 3.4 Dirección IP WAN • Si su ISP no le ha asignado una dirección IP fija, seleccione Get automatically from your ISP (Obtener automáticamente de su ISP) y haga clic en Next (Siguiente) para ir a la sección 3.5.
ESPAÑOL 3.5 Dirección WAN MAC Una dirección MAC es un número que identifica de manera única a un dispositivo en una red. Ajuste la dirección MAC del puerto WAN usando la dirección MAC asignada predeterminada de fábrica de su dispositivo o clonando la dirección MAC de un ordenador en su LAN. Por defecto, el NBG334W utiliza la dirección MAC asignada de fábrica para identificarse en la WAN.
ESPAÑOL 2 Haga clic en Finish (Finalizar) en la pantalla siguiente para completar el asistente para la configuración. 3 Enhorabuena. Abra un explorador de web, como Internet Explorer, para visitar su sitio web favorito. V Si no puede acceder a Internet cuando su ordenador está conectado a uno de los puertos LAN del NBG334W, compruebe sus conexiones. Luego apague el NBG334W, espere unos segundos y vuelva a encenderlo.
ESPAÑOL 2 Localice su nombre de red (SSID) y haga clic en Connect (Conectar) para agregar el ordenador a la red inalámbrica. 3 Siga las instrucciones de su utilidad inalámbrica. Cuando finalice, abra un explorador como Internet Explorer para navegar por Internet. • Para más información, consulte la Guía del usuario para un tutorial sobre cómo agregar un ordenador a su red inalámbrica.
ESPAÑOL 35
FRANÇAIS Présentation Le NBG334W est un routeur large bande sans fil IEEE 802.11b/g ou un point d’accès (AP). En tant que routeur, le NBG334W dirige le trafic entre votre réseau sans fil et un autre réseau tel qu’Internet comme indiqué ci-dessous, offrant des services tels que le filtrage de contenu, la gestion de bande passante et un pare feu.
FRANÇAIS 1 Connexions matérielles Procédez comme suit pour effectuer les connexions matérielles pour l'installation initiale. 1 WAN Connectez votre modem au port WAN à l'aide du câble fourni avec votre modem. 2 LAN .Connectez votre ordinateur à un port LAN à l'aide du câble Ethernet jaune se trouvant dans le package. 3 Connexion de l'ALIMENTATION Utilisez le cordon d'alimentation fourni dans le package pour connecter la prise POWER (ALIMENTATION) à une source d'alimentation appropriée.
FRANÇAIS V Si une LED ne s'allume pas, vérifiez vos connexions. Si le problème persiste, débranchez le NBG334W de sa source d’alimentation, patientez quelques secondes et rallumez-le. 2 Accéder au configurateur Web Informations de connexion par défaut Adresse IP http://192.168.1.1 mot de passe administrateur 1234 1 Lancez un navigateur Internet tel qu’Internet Explorer. Entrez “http://192.168.1.1” comme indiqué ci-dessous. 2 La fenêtre Password (Mot de passe) s'affiche.
FRANÇAIS V Cliquez sur Go to Wizard setup (Aller à installation de l'assistant) pour la première installation de votre NBG334W. 3 Installation de l'assistant de connexion 1 Choisissez votre langue dans la liste déroulante. Cliquez sur Next (Suivant). 2 Cliquez sur Next (Suivant) pour continuer avec Connection Wizard (Assistant de connexion).
FRANÇAIS 3.1 Informations du système Cet écran est optionnel. Cliquez simplement sur Next (Suivant). 3.2 LAN sans fil Configurez votre NBG334W afin qu’il prenne en charge un réseau sans fil en suivant ces étapes. 1 Saisissez un Name (SSID) (Nom (SSID)) unique pour identifier le NBG334W sur le LAN sans fil. 2 Sélectionnez un canal sans fil. Le NBG334W et les autres clients sans fil doivent utiliser le même canal.
FRANÇAIS clé de sécurité est sensible à la casse de sorte que « ABCD » n’est pas la même chose que « abcd ». " Notez la clé de sécurité, Name (Nom) (SSID), Security and Channel Selection (Sécurité et sélection de canal) pour une utilisation ultérieure étant donné que le NBG334W et les autres périphériques sur votre réseau sans fil doivent utiliser les même paramètres. 5 Cliquez sur OK pour continuer. 3.
FRANÇAIS Connexion Ethernet Sélectionnez Ethernet pour votre type de connexion WAN et cliquez sur Next (Suivant) pour aller à la section 3.4. Connexion PPPoE 1 Sélectionnez PPPoE comme étant votre type de connexion WAN. 2 Tapez un Service Name (Nom de service) (si votre ISP vous en a donné un), User Name (Nom d’utilisateur) et Password (Mot de passe). Cliquez sur Next (Suivant) pour aller à la section 3.4. Connexion PPTP 1 Sélectionnez PPTP comme type de connexion WAN.
FRANÇAIS 4 Tapez l’ID/Nom de connexion (si fourni par votre ISP). Cliquez sur Next (Suivant) pour aller à la section 3.4. 3.4 Adresse IP WAN • Si votre ISP ne vous a pas attribué d’adresse IP fixe, sélectionnez Get automatically from ISP (Obtenir automatiquement de l'ISP) et cliquez sur Next (Suivant) pour aller à la section 3.5. • Si votre ISP vous a donné une adresse IP fixe: 1 Sélectionnez Use fixed IP address provided by your ISP (Utiliser l’adresse IP fixe fournie par votre ISP).
FRANÇAIS 3.5 Adresse MAC WAN Une adresse MAC est un numéro qui identifie de façon unique un appareil sur tout réseau. Configurez l'adresse MAC du port WAN en utilisant l’adresse MAC de votre appareil par défaut attribuée en usine ou en clonant l'adresse MAC d'un ordinateur sur votre LAN. Par défaut, le NBG334W utilise l’adresse MAC attribuée en usine pour s’identifier sur le WAN. • Sélectionnez Factory Default (Par défaut d'usine) pour utiliser l'adresse MAC par défaut attribuée en usine.
FRANÇAIS 2 Cliquez sur Finish (Terminer) dans l’écran ci-dessous pour terminer l'installation par l'assistant. 3 Félicitations. Ouvrez un navigateur web, Internet Explorer par exemple, pour visiter votre site web favori. V Si vous n'arrivez pas à accéder à Internet quand votre ordinateur est connecté à l’un des ports LAN du NBG334W, vérifiez vos connexions. Puis éteignez le NBG334W, patientez quelques secondes et rallumez-le.
FRANÇAIS 2 Repérez le nom de votre réseau (SSID) et cliquez sur Connect (Connecter) pour ajouter votre ordinateur au réseau sans fil. 3 Suivez les instructions sur votre utilitaire sans fil. Quand c’est terminé, ouvrez un navigateur Internet, comme Internet Explorer par exemple pour naviguer sur Internet. • Pour plus d’informations consultez le guide de l’utilisateur pour trouver un didacticiel vous indiquant comment ajouter un ordinateur à votre réseau sans fil.
FRANÇAIS 47
ITALIANO Cenni generali NBG334W è un router broadband wireless IEEE 802.11b/g nonché un Access Point (AP). Come router, NBG334W dirige il traffico tra la rete wireless e un'altra rete, come ad esempio Internet (vedere sotto), fornendo servizi quali il filtraggio dei contenuti, la gestione della banda dati e firewall.
ITALIANO 1 Collegamenti hardware Di seguito sono illustrati i collegamenti hardware per l'installazione iniziale. 1 WAN Collegare il modem alla porta WAN utilizzando il cavo fornito a corredo del modem. 2 LAN Collegare il computer a una porta LAN tramite il cavo Ethernet giallo presente nella confezione. 3 Collegamento dell'alimentazione Utilizzare il cavo di alimentazione fornito a corredo per collegare l'ingresso POWER a una sorgente di alimentazione appropriata.
ITALIANO VSescollegare un LED non si accende, controllare i collegamenti. Se il problema persiste, NBG334W dall'alimentazione, attendere qualche secondo e poi riaccenderlo. 2 Accesso allo strumento di configurazione Web Informazioni di accesso predefinite Indirizzo IP http://192.168.1.1 Password di amministratore 1234 1 Aprire un browser Internet, come ad esempio Internet Explorer. Immettere l'indirizzo “http://192.168.1.1” come raffigurato sotto. 2 Viene visualizzata la finestra Password.
ITALIANO 5 Scegliere Go to Wizard setup (vai a configurazione guidata) per configurare NBG334W la prima volta. 3 Configurazione guidata connessione 1 Selezionare la lingua desiderata dall'elenco a discesa. Fare clic su Next (avanti). 2 Scegliere Next (avanti) nella schermata successiva per procedere con la Connection Wizard (connessione guidata). " Immettere le informazioni e i parametri Internet esattamente come sono stati forniti dal proprio ISP nelle diverse schermate della procedura guidata.
ITALIANO 3.1 Informazioni sul sistema Questa schermata è opzionale. È unicamente possibile fare clic su Next (avanti). 3.2 LAN Wireless Configurare NBG334W per supportare una rete wireless seguendo la procedura seguente 1 Immettere un Name (SSID, nome della rete) univoco per identificare il NBG334W sulla LAN wireless. 2 Selezionare un canale wireless. Il NBG334W e gli altri client wireless devono utilizzare lo stesso canale.
ITALIANO chiave di sicurezza viene fatta distinzione tra maiuscole e minuscole, quindi ad esempio "BCD" è diverso da "bcd". " Annotare la chiave di sicurezza, Name (SSID), Security (sicurezza)?e Channel Selection (selezione canale)?per poterli utilizzare in seguito affinché NBG334W e gli altri dispositivi presenti nella rete wireless possano utilizzare le stesse impostazion. 5 Fare clic su OK per continuare. 3.
ITALIANO Collegamento Ethernet Scegliere Ethernet come tipo di connessione WAN e fare clic su Next (avanti)?per passare alla sezione 3.4. Collegamento PPPoE 1 Selezionare PPPoE come tipo di connessione WAN. 2 Immettere un Service Name (nome del servizio, se l'ISP ne ha fornito uno), User Name (nome utente) e Password. Scegliere Next (avanti) per passare alla sezione 3.4. Collegamento PPTP 1 Selezionare PPTP utilizzando il tipo di connessione WAN. 2 Immettere User Name (nome utente) e Password.
ITALIANO 4 Immettere Connection ID/Name (identificativo connessione/nome, se forniti dall'ISP). Scegliere Next (avanti) per passare alla sezione 3.4. 3.4 Indirizzo IP?della WAN • If yourSe l'ISP non ha assegnato un indirizzo IP?statico, selezionare Get automatically from your ISP (ottieni automaticamente dall'ISP)?e scegliere Next (avanti) per passare alla sezione 3.5.
ITALIANO 3.5 Indirizzo MAC WAN Un indirizzo MAC è un numero che identifica in modo univoco un dispositivo su una rete qualsiasi. Configurare l'indirizzo MAC?della porta WAN utilizzando l'indirizzo MAC?predefinito assegnato in fabbrica al dispositivo oppure clonando l'indirizzo MAC?di un computer della LAN. Per impostazione predefinita, NBG334W utilizza l'indirizzo MAC assegnato dalla fabbrica per identificarsi sulla WAN.
ITALIANO 2 Scegliere Finish (fine) nella schermata sotto per completare la configurazione guidata. 3 Congratulazioni! Aprire il browser, quale ad esempio Internet Explorer, per visitare un sito Web qualsiasi. V Se non è possibile accedere a Internet quando il computer è connesso a una delle porte LAN del NBG334W, controllare i collegamenti. A questo punto spegnere il NBG334W, attendere qualche secondo e poi riaccenderlo.
ITALIANO 2 Individuare il nome della rete (SSID) e scegliere Connect (connetti)?per aggiungere il computer alla rete wireless. 3 Seguire le istruzioni dell'utilità wireless. Terminata l'operazione, aprire un browser Internet come Internet Explorer per navigare in Internet.. • Per ulteriori informazioni, vedere la Guida dell'utente per consultare un tutorial su come aggiungere un computer alla rete wireless.
ITALIANO 59
SVENSKA Översikt NBG334W är en IEEE 802.11b/g trådlös bredbandsrouter eller accesspunkt (AP). Som router dirigerar NBG334W trafik mellan ditt trådlösa nätverk och ett annat nätverk som t.ex. Internet enligt nedan, tillhandahåller tjänster som t.ex. innehållsfiltrering, bandbreddshantering och en brandvägg.
SVENSKA 1 Maskinvaruanslutningar Gör följande för att utföra maskinvaruanslutningar för inledande inställning. 1 WAN Anslut ditt modem till WAN-porten med sladden som medföljde ditt modem. 2 LAN Anslut datorn till en LAN-port med den gula Ethernetsladden från förpackningen. 3 Strömanslutning Använd strömsladden från förpackningen för att ansluta POWER-uttaget till en lämplig strömkälla. Detta är även din strömlinjeanslutning. Indikatorlamporna Titta på indikatorlamporna.
SVENSKA V Kontrollera anslutningarna ifall ingen indikatorlampa tänds. Om detta inte hjälper, koppla bort NBG334W från strömkällan, vänta några sekunder och anslut sedan den igen. 2 Åtkomst till webbkonfigurator Standardinloggningsinformation IP-adress http://192.168.1.1 Administratörslösenord 1234 1 Öppna en Internet-webbläsare som t.ex. Internet Explorer. Ange http://192.168.1.1 enligt nedan. 2 Fönstret Password (lösenord) visas. Ange lösenord (1234 är standard) och klicka på Login (inloggning).
SVENSKA 5 Klicka på Go to Wizard setup (gå till guideinställning) för att ställa in din NBG334W för första gången. 3 Inställningsguide för anslutning 1 Välj språk i rullgardinsrutan. Klicka på Next (nästa). 2 Klicka på Next (nästa) på den följande skärmen för att fortsätta med anslutningsguiden. " Ange dina Internet-uppkopplingsuppgifter exakt som du fått dem av din Internet-leverantör på varje guideskärmbild.
SVENSKA 3.1 Systeminformation Denna skärm är valfri. Du kan helt enkelt klicka på Next (nästa). 3.2 Trådlöst LAN Konfigurera din NBG334W för att stödja ett trådlöst nätverk genom att följa dessa steg. 1 Ange ett unikt Name (SSID) (namn) för att identifiera NBG334W i det trådlösa LAN. 2 Välj en trådlös kanal. NBG334W och andra trådlösa klienter måste använda samma kanal. 3 Välj Auto för att automatiskt använda WPA-PSK som ger en högre säkerhetsnivå.
SVENSKA " Skriv ner säkerhetsnyckeln, Name (namn) (SSID), Security (säkerhet) och Channel Selection (kanalval) för senare användning eftersom NBG334W och andra enheter i ditt trådlösa nätverk måste använda samma inställningar. 5 Klicka på OK för att fortsätta. 3.3 WAN-anslutning 1 Du måste kanske vänta flera minuter medan guiden försöker detektera vilken WANanslutningstyp (Ethernet, PPPoE eller PPTP) du använder.
SVENSKA PPPoE-anslutning 1 Välj PPPoE som WAN-anslutningstyp. 2 Ange ett Service Name (tjänstenamn - om du fått ett av din Internet-leverantör), User Name (användarnamn) och Password (lösenord). Klicka på Next (nästa) för att gå till avsnitt 3.4. PPTP-anslutning 1 Välj PPTP som WAN-anslutningstyp. 2 Ange User Name (användarnamn) och Password (lösenord). • Välj Get automatically from ISP (hämta automatiskt från Internet-leverantör) om din Internet-leverantör inte har tilldelat dig en fast PPTP IP-adress.
SVENSKA 3.4 WAN IP-adress • Om din Internet-leverantör inte har tilldelat dig en fast IP-adress, välj Get automatically from your ISP (hämta automatiskt från din Internet-leverantör) och klicka på Next (nästa) för att gå till avsnitt 3.5. • Om din Internet-leverantör har gett dig en fast IP-adress: 1 Välj Use fixed IP address provided by your ISP (använd fast IP-adress som tillhandahållits av Internet-leverantör). Klicka på Next (nästa).
SVENSKA • Välj Set WAN MAC Address (ställ in WAN MAX-adress) och ange den MAC-adress du vill använda. 3.6 Bandbreddshantering Välj Enable BM for all traffic automatically (aktivera BM automatiskt för all trafik) för att låta NBG334W prioritera datatrafik beroende på dess användning. Till exempel kan videoströmmar prioriteras högre än e-post. Markera ej om du är osäker. Klicka på Next (nästa). 3.7 Installationen är klar.
SVENSKA V Om du inte kan ansluta till Internet när din dator är ansluten till en av NBG334W:s LAN-portar, kontrollera dina anslutningar. Stäng därefter av NBG334W, vänta några sekunder och sätt sedan på den igen. Om detta inte fungerar ska du köra guiden igen och vara extra noga med att skriva in informationen korrekt. Dessutom, om du använder ett nytt Internet-konto, kontakta din ISP för att kontrollera att det är aktivt. Se Felsökning eller bruksanvisningen för mer information.
SVENSKA V Om du inte kan få åtkomst till Internet från det trådlösa nätverket, kontrollera att NBG334W och datorerna i ditt trådlösa nätverk använder samma trådlösa inställningar. Se kapitlet om trådlöst LAN i bruksanvisningen för mer information. Om du inte vet vilken säkerhetsnyckel du har, tryck på RESET (återställ) på din NBG334W i 10 sekunder eller tills ( ) blinkar. Inställningarna i din enhet återgår till fabriksstandard. Alla inställningar som du har sparat i enheten går förlorade.
SVENSKA 71