Network Cables User Manual

Chapter 10 Shares
NSA-220 User’s Guide
123
The following table describes the labels in this screen.
Table 41 Shares > Share Path Browse
LABEL DESCRIPTION
Create Folder Type a folder name and click Create Folder to make a new folder. The name can be
1 to 255 single-byte (no Chinese characters allowed for example) ASCII characters.
The name cannot be the same as another existing folder in the same path. See
Section 2.5.5 on page 38 for more information on folder names.
Current location This is the name of the share and folder path that you are in.
Type The icon in this column identifies the entry as a folder or a file.
The folder with an arrow pointing up is for the link that takes you to the next higher
layer in the share’s folder tree.
Name This section lists the volume’s existing folders. Select the one for which you want to
create a share (click to the right of the folder name to select). You can also click the
folder’s name to navigate to a sub-folder within the folder.
Apply Click this button to return to the previous screen with your folder selection.
Cancel Click this button to return to the previous screen without selecting a folder.