Network Cables User Manual

Chapter 11 Maintenance Screens
NSA-220 User’s Guide
129
11.5 Log Messages
Here are some example log messages.
4 Warning
5Notice
6Info
Table 44 Log Severity Levels (continued)
LEVEL DESCRIPTION
Table 45 Log Messages
CLASS SEVERITY MESSAGE
Network NOTICE %s is active because of changing Port Group. Enable DHCP client.
Network NOTICE %s is inactive because of changing Port Group. Disable DHCP
client.
Network NOTICE %s MTU > (%s MTU - 8), %s may not work correctly.
Network NOTICE (%s MTU - 8) < %s MTU, %s may not work correctly.
Network NOTICE Add interface %s.
Network NOTICE Because %s link down. Default route will not apply until %s link up.
Network NOTICE Because base interface %s will be disabled.Interface %s is disabled
now., base_ud_iface
Network NOTICE Network Config setting is changed
Network NOTICE Interface %s was disabled.
Network NOTICE Interface %s was enabled.
Network NOTICE Port Group on %s is changed. Renew DHCP client.
Network NOTICE show_sdx
Services INFO admin has changed the password
Services INFO HTTP management port has changed to %s
Services INFO Clock has disable daylight saving
Services INFO MyClock has enable daylight saving
Services INFO MyClock has set timezone to %s
Services INFO MyClock has set timezone to default
Services INFO The date and time are updated from NTP server.
Services INFO The date and time are updated manually.
Services INFO The time is updated manually.
Services NOTICE MyClock has changed daylight saving interval
Services NOTICE MyClock has disabled daylight saving interval
Services NOTICE NTP server has set to '%s'
Services NOTICE NTP server has set to null
Services NOTICE The NTP service is disabled.
Services NOTICE The NTP service is enabled.
Services WARNING Reaching Maximum Allowed Rules