Network Cables User Manual

Chapter 11 Maintenance Screens
NSA-220 User’s Guide
132
Figure 92 Maintenance > FW Upgrade
The following table describes the labels in this screen.
11.8 Shutdown
Click the Maintenance link in the Navigation panel and then click the Shutdown link or the
Shutdown tab to access the Maintenance > Shutdown screen.
Use this screen to turn off the NSA or perform a software restart. A software restart is faster
than turning the NSA off and then turning it on again. Before shutting down or restarting,
check the System Status > Active Sessions screen to make sure that no one is logged into the
NSA or transferring files to or from the NSA.
Figure 93 Maintenance > Shutdown
The following table describes the labels in this screen.
Table 47 Maintenance > FW Upgrade
LABEL DESCRIPTION
Firmware Upgrade
Firmware File Type the location of the firmware file you want to upload
Browse Click Browse to find the file on your computer
Upload Click Upload to upload the new firmware. The NSA automatically restarts
after you upgrade. Wait until the restart completes before accessing the
NSA again. If you interrupt the upgrade, then the NSA may become
unusable.
Reset Click Reset to begin configuring this screen afresh.
Table 48 Maintenance > Shutdown
LABEL DESCRIPTION
System Shutdown
Restart Click Restart to have the device perform a software restart.
Shutdown Click Shutdown to shut down the system and restart it again later.