P-662HW-D Series ADSL2+ 4-Port Wireless Security Gateway Quick Start Guide Version 3.
P-662HW-D Series Quick Start Guide Overview Use the included CD or follow the directions in this Quick Start Guide to set up your P-662HW-D. How to Use the Included CD This CD provides multi-media animations that help you set up your P-662HW-D. 1 On the included CD, click Multimedia Auto Provisioner > Installation Tutorial. 2 At the end of the tutorial, click Configuration Genie.
P-662HW-D Series Quick Start Guide If the lights are not on, check your connections, and inspect your cables for damage. If you still have problems, contact your local vendor. 2 Status Page 1 In your browser, go to http://192.168.1.1. 2 Enter the default password user to go directly to the Status screen. If your browser cannot find this screen, check its security settings. See Troubleshooting for details.
P-662HW-D Series Quick Start Guide 3 See the User’s Guide for field descriptions of the Status screen. 3 Internet Setup 1 Open your web browser, and go to http://www.zyxel.com. Your P-662HW-D tries to detect your Internet connection. This takes about two minutes. If any other screens appear, follow the directions in the screen. If the web page opens correctly, your P-662HW-D is ready to use. If the web page does not open, follow the rest of the steps. You should have the information provided by your ISP.
P-662HW-D Series Quick Start Guide 3 Enter the admin password 1234 to set up your internet and wireless connections and security settings. Click Login. If your browser cannot find the login screen, check its security settings. See Troubleshooting for details.. 4 Follow the directions in this screen. 5 Click Apply to replace the factory default certificate. This creates a unique certificate for your P-662HW-D. If you click Ignore, this prompt will show up every time you login.
P-662HW-D Series Quick Start Guide 7 Click INTERNET / WIRELESS SETUP. Wait while your P662HW-D tries to detect your DSL connection. 8 Follow the directions in the wizard. Do not change default settings if your ISP did not provide them. OTIST ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-662HW-D.
P-662HW-D Series Quick Start Guide A) Check the lights on the front panel. If they are different from what is described in section 1, make sure the connections are correct. (See section 1.) If the lights are still different, turn off the device, wait a few seconds, and turn it on again. B) Follow the steps in section 3 again. Make sure you enter the correct information. For example, if your account has a user name and password, make sure you type it correctly.
