Prestige 2602R Series ADSL VoIP IAD Quick Start Guide Version 3.
Prestige 2602R Series Quick Start Guide Overview The Prestige P2602R ADSL VoIP IAD (Integrated Access Device) is an ADSL router with two phone ports for Voice over IP (VoIP) calls. See the User’s Guide for more information on all features. The following figure shows your Prestige (A) connected to the Internet. 1 Hardware Connections You need the following before you start: Note: You may need your Internet access and voice account information.
Prestige 2602R Series Quick Start Guide Do the following to make hardware connections for initial setup. 1 DSL: Connect the Prestige to a telephone jack using the included telephone wire. 2 LAN: Use an Ethernet cable to connect a computer or external hub to the LAN port for initial configuration and/or Internet access. 3 Phone 1-2: Connect one or more analog telephones to these ports using telephone wires. These are FXS (Foreign Exchange Station) ports.
Prestige 2602R Series Quick Start Guide • Web Configurator Internet Access Wizard You will need your Internet access information such as user name and password if given by your ISP.
Prestige 2602R Series Quick Start Guide After the Prestige automatically detected and configured the Internet connection, if you connect the Prestige to another DSL line with different VPI and VCI, zero configuration will not work and you need to reset the Prestige to the factory defaults or manually configure the Prestige for Internet access. 2.2 Web Configurator Internet Access Wizard 2.2.1 Accessing the Web Configurator 1 Launch your web browser. Enter “192.168.1.1” as the web site address.
Prestige 2602R Series Quick Start Guide 2.2.2 Internet Access Setup 1 Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and Encapsulation you chose in the first wizard screen. RFC 1483 A) Select Routing if your ISP gave you an IP address and allows multiple computers to share an Internet account. Otherwise, select Bridge. Then select RFC 1483. A B) Click Next. C C) If you select Routing, enter the IP address given by your ISP.
Prestige 2602R Series Quick Start Guide ENET ENCAP A) Select Routing, then ENET ENCAP. B) Click Next. A C) If your ISP gave you an IP address, subnet mask and a gateway address, select Static IP address and enter them. Otherwise, select Obtain IP Address Automatically. C B D) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT. D E E) Click Next. PPPoE A) Select Routing, then PPPoE. B) Click Next.
Prestige 2602R Series Quick Start Guide PPPoA A) Select Routing if your ISP allows multiple computers to share an Internet account. Otherwise, select Bridge. Then select PPPoA. A C B) Click Next. C) Enter the username and password given by your ISP. D B D) If your ISP gave you an IP address, select Static IP address and enter it. Otherwise, select Obtain IP Address Automatically. E F E) Select Nailed-Up G Connection to have your connection up all the time.
Prestige 2602R Series Quick Start Guide A) Select the Active check box. B) If you have a SIP account like 1234@VoIP-provider.com,“1234” would be the SIP Number and “VoIPprovider.com” would be the SIP Service Domain. C) Enter the SIP server IP address. Enter the SIP server port number, if not given, leave it set to the default. D) If you have no registrar server information, copy what you entered in the SIP Server Address/Port fields.
Prestige 2602R Series Quick Start Guide 2.2.3 Media Bandwidth Management 1 Click Media Bandwidth Mgnt. in the Site Map screen to open the wizard screen. A) Select Active to have the Prestige control the bandwidth allocated to traffic going out through the Prestige’s WAN or LAN port. A B) Select the services for which you want to manage bandwidth. B C) Click Next. C 2 The Prestige automatically creates the bandwidth class for each service you select.
Prestige 2602R Series Quick Start Guide 2.3 Speed Dial Configuration Click Voice in the navigation panel and then Speed Dial to display the following screen. Speed dial provides shortcuts for dialing frequently used (VoIP) phone numbers. You can use speed dial entries for peer-to-peer calls or SIP numbers that use letters. A B C D A) Select a speed dial key combination. B) Enter the SIP number of the party you will call and a name to identify them.
Prestige 2602R Series Quick Start Guide PROBLEM CORRECTIVE ACTION Cannot access the Prestige from my computer. Check the cable connection from your computer to the Prestige. Make sure your computer’s IP address is in the same subnet as the Prestige’s IP address (see Section 3.1 on page 12). Make sure your computer’s Ethernet adapter is installed and functioning properly. If the Prestige’s IP address has changed, then enter the new one as the URL. Use Internet Explorer 6.
Prestige 2602R Series Quick Start Guide 5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options. 7 Click OK to close the Internet Protocol (TCP/IP) Properties window. 8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window. 9 Close the Network Connections screen. Viewing Your Product’s Certifications 1 Go to www.zyxel.com.