User's Guide
Chapter 19 File Manager
NWA/WAC/WAX Series User’s Guide
226
3 Use an FTP client on your computer to connect to the Zyxel Device. For example, in the Windows
command prompt, type ftp 192.168.1.2. Keep the console session connected in order to see when
the firmware recovery finishes.
4 Enter your user name when prompted.
5 Enter your password as requested.
6 Enter “hash” for FTP to print a `#' character for every 1024 bytes of data you upload so that you can
watch the file transfer progress.
7 Enter “bin” to set the transfer mode to binary.
8 Transfer the firmware file from your computer to the Zyxel Device. Type put followed by the path and
name of the firmware file. This examples uses put C:\ftproot\Zyxel Device_FW\600ABFH0C0.bin.
9 Wait for the file transfer to complete.
10 Enter “quit” to exit the ftp prompt.
19.4 Shell Script
Use shell script files to have the Zyxel Device use commands that you specify. Use a text editor to create
the shell script files. They must use a “.zysh” filename extension.
Click Maintenance > File Manager > Shell Script to open this screen. Use the Shell Script screen to store,
name, download, upload and run shell script files. You can store multiple shell script files on the Zyxel
Device at the same time.
Note: You should include write commands in your scripts. If you do not use the write
command, the changes will be lost when the Zyxel Device restarts. You could use
multiple write commands in a long script.
C:\>ftp 192.168.1.2
Connected to 192.168.1.2.
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 5 allowed.
220-Local time is now 21:28. Server port: 21.
220-This is a private system - No anonymous login
220 You will be disconnected after 600 minutes of inactivity.
User (192.168.1.2:(none)): admin
331 User admin OK. Password required
Password:
230 OK. Current restricted directory is /
ftp> hash
Hash mark printing On ftp: (2048 bytes/hash mark) .
ftp> bin
200 TYPE is now 8-bit binary
ftp> put C:\ftproot\Zyxel Device_FW\600ABFH0C0.bin