User's Guide

NWA/WAC/WAX Series User’s Guide
231
CHAPTER 21
LEDs
21.1 Overview
The LEDs of your Zyxel Device can be controlled such that they stay lit (ON) or OFF after the Zyxel Device
is ready. There are two features that control the LEDs of your Zyxel Device - Locator and Suppression (see
Section 1.4 on page 19).
21.1.1 What You Can Do in this Chapter
• The Suppression screen (Section 21.2 on page 231) allows you to set how you want the LEDs to
behave after the Zyxel Device is ready.
• The Locator screen (Section 21.3 on page 232) allows users to see the actual location of the Zyxel
Device between several devices in the network.
21.2 Suppression Screen
The LED Suppression feature allows you to control how the LEDs of your Zyxel Device behave after it’s
ready. The default LED suppression setting of your AP is different depending on your Zyxel Device model.
You can go to the Maintenance > LEDs > Suppression screen to see the default LED behavior and
change the LED suppression setting. After you make changes in the suppression screen, it will be stored
as the default when the Zyxel Device is restarted. See (Section 3.2 on page 34) for information on default
values for different models.
Note: When the Zyxel Device is booting or performing firmware upgrade, the LEDs will light up
regardless of the setting in LED suppression.
To access this screen, click Maintenance > LEDs > Suppression.