User's Guide

Chapter 27 Network
NWA/WAC/WAX Series User’s Guide
244
Figure 147 Configuration > Network > IP Setting
Each field is described in the following table.
Table 103 Configuration > Network > IP Setting
LABEL DESCRIPTION
IP Address Assignment
Get
Automatically
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and gateway manually.
IP Address Enter the IP address for this interface.
Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
Gateway Enter the IP address of the gateway. The Zyxel Device sends packets to the gateway when
it does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
DNS Server IP
Address
Enter the IP address of the DNS server.
Use Proxy to Access
Internet
If the Zyxel Device is behind a proxy server, you need to select this option and configure the
proxy server settings so that the Zyxel Device can access the NCC through the proxy server.
Proxy Server Enter the IP address of the proxy server.
Proxy Port Enter service port number used by the proxy server.
Authentication Select this option if the proxy server requires authentication before it grants access to the
Internet.
User Name Enter your proxy user name.
Password Enter your proxy password.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.