User's Manual

Prestige 2602H-6xC Support Notes

To configure the phone port setting please follow the below step.

Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP

address of the Prestige. The default management IP of Prestige is 192.168.1.1.

Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'

Step 3. On the left column click on Voice to bring you to voice function menu. While in the Voice menu click

on Phone to enter phone port configuration page.

Step 4. By using the phone port selector located on upper right of the phone port configuration page select the

phone port you wish to configure.

Step 5. Change the phone port parameter as you desired and click Apply when you are finish to save and let the

setting to take effect. To configure the 2nd phone port use the phone port selector and select phone2 and follow

the step 1 to 5 to complete the 2nd phone port setup.

Each field's detail description is listed below.

Label Description

Phone Port

Settings

Use this field to select the phone port that you want to configure.

Speaking

Volume

Use this field to set the loudness that the Prestige uses for the speech signal

that it sends to the peer device. -1 is the quietest and 1 is the loudest.

Listening

Volume

Use this field to set the loudness that the Prestige uses for the speech signal

that it receives from the peer device and sends to your phone. -1 is the

quietest and 1 is the loudest.

Outgoing

Call use

SIP 1 and SIP 2 correspond to the Prestige’s SIP accounts. Select whether

you want the phone(s) attached to this phone port to use SIP account 1, 2 or

both when you make a call. If you select both SIP accounts, the Prestige will

first try to use SIP account 2 and then SIP account 1 when you make a call.

G.168 Active

Select this check box to cancel the echo caused by the sound of your voice

reverberating in the telephone receiver while you talk.

VAD

Support

Select this check box to use Voice Activity Detection (VAD) to reduce the

bandwidth that a call uses. The Prestige will generate and send comfort

noise when you are not talking.