User's Manual

ManualsBrandsZyXEL ManualsNetwork RouterZyXEL ADSL/ADSL2/ADSL2+ Router 660R-6xC Series

111

112

113

114

115

116

117

118

119

120

Prestige 660R-6xC Series User’s Guide

Chapter 13 Introducing the SMT 116

Several operations that you should be familiar with before you attempt to modify the

configuration are listed in the table below.

Table 30 Navigating the SMT Interface

OPERATION KEY STROKE DESCRIPTION

Move down to

another menu

[ENTER] To move forward to a submenu, type in the number of the

desired submenu and press [ENTER].

Move up to a

previous menu

[ESC] Press [ESC] to move back to the previous menu.

Move to a hidden

Press [SPACE

BAR] to change

No to Yes then

press [ENTER].

Fields beginning with "Edit" lead to hidden menus and have a

default setting of No. Press [SPACE BAR] once to change No

to Yes, then press [ENTER] to go to the "hidden" menu.

Move the cursor [ENTER] or [UP]/

[DOWN] arrow

keys.

Within a menu, press [ENTER] to move to the next field. You

can also use the [UP]/[DOWN] arrow keys to move to the

previous and the next field, respectively.

When you are at the top of a menu, press the [UP] arrow key to

move to the bottom of a menu.

Entering

information

Type in or press

[SPACE BAR],

then press

[ENTER].

You need to fill in two types of fields. The first requires you to

type in the appropriate information. The second allows you to

cycle through the available choices by pressing [SPACE BAR].

Required fields <? > or

ChangeMe

All fields with the symbol <?> must be filled in order to be able

to save the new configuration.

All fields with ChangeMe must not be left blank in order to be

able to save the new configuration.

N/A fields <N/A> Some of the fields in the SMT will show a <N/A>. This symbol

refers to an option that is Not Applicable.

Save your

configuration

[ENTER] Save your configuration by pressing [ENTER] at the message

"Press ENTER to confirm or ESC to cancel". Saving the data on

the screen will take you, in most cases to the previous menu.

Make sure you save your settings in each screen that you

configure.

Exit the SMT Type 99, then press [ENTER].Type 99 at the main menu prompt

and press [ENTER] to exit the SMT interface.