User's Manual

Prestige 660R-6xC Series User’s Guide
147 Chapter 18 Remote Node Configuration
Figure 79 Menu 21.11 WebSet 11
Figure 80 Menu 21.12 WebSet 12
18.5 Editing ATM Layer Options
Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options.
In menu 11.1, move the cursor to the Edit ATM Options field and then press [SPACE BAR]
to select Yes. Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options.
There are two versions of menu 11.6 for the Prestige, depending on whether you chose VC-
based/LLC-based multiplexing and PPP encapsulation in menu 11.1.
Menu 21.11 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- ----------------------------------------------------------- - - -
1 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=161 N D N
2 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=162 N D F
3 N
4 N
5 N
6 N
Enter Filter Rule Number (1-6) to Configure:
Menu 21.12 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- ----------------------------------------------------------- - - -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23 N D N
2 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=21 N D N
3 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=69 N D N
4 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=80 N D N
5 N
6 N
Enter Filter Rule Number (1-6) to Configure
Note: Do not edit filter sets 11 and 12. They are used
exclusively by the web configurator. Any rules you configured in
sets 11 and 12 will be erased and replaced when you apply the
web configurator-generated filter rules.