User's Manual

Prestige 660R-6xC Series User’s Guide

Chapter 26 System Maintenance 214

CHAPTER 26

System Maintenance

This chapter leads you through SMT menus 24.8 to 24.10.

26.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of

the same functionality as the SMT, while adding some low-level setup and diagnostic

functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the

zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 —

System Maintenance. A list of valid commands can be found by typing help or ? at the

command prompt. Type “

exit” to return to the SMT main menu when finished.

Figure 147 Command Mode in Menu 24

Figure 148 Valid Commands

Menu 24 - System Maintenance

1. System Status

2. System Information and Console Port Speed

3. Log and Trace

4. Diagnostic

5. Backup Configuration

6. Restore Configuration

7. Upload Firmware

8. Command Interpreter Mode

9. Call Control

10. Time and Date Setting

11. Remote Management

Enter Menu Selection Number:

ras> ?

Valid commands are:

sys exit device ether

wan poe ip ppp

bridge hdap lan

ras>