User's Manual

Prestige 660R-6xC Series User’s Guide
231 Chapter 28 IP Policy Routing
3 Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
4 Create another policy set in menu 25.
5 Create a rule in menu 25.1 for this set to route packets from any host (IP=0.0.0.0
means any host) with protocol TCP and port FTP access through another gateway
(192.168.1.100).
Figure 161 IP Routing Policy Example 2
6 Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
7 Apply both policy sets in menu 3.2 as shown next.
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set2
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care Packet length= 10
Precedence = Don't Care Len Comp= N/A
Source:
addr start= 0.0.0.0end= N/A
port start= 0 end= N/A
Destination:
addr start= 0.0.0.0 end= N/A
port start= 20 end= 21
Action= Matched
Gateway addr =192.168.1.100 Log= No
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel: