User's Manual

Prestige 660R-6xC Series User’s Guide
Chapter 6 WAN Setup 66
Figure 19 Traffic Redirect Example
The following network topology allows you to avoid triangle route security issues when the
backup gateway is connected to the LAN. Use IP alias to configure the LAN into two or three
logical networks with the Prestige itself as the gateway for each LAN network. Put the
protected LAN in one subnet (Subnet 1 in the following figure) and the backup gateway in
another subnet (Subnet 2). Configure filters that allow packets from the protected LAN
(Subnet 1) to the backup gateway (Subnet 2).
Figure 20 Traffic Redirect LAN Setup
6.7 Configuring WAN Backup
To change your Prestige’s WAN backup settings, click WAN , then WAN Backup. The screen
appears as shown.