User's Manual

Prestige 660R-6xC Series User’s Guide
Chapter 7 Network Address Translation (NAT) Screens 76
Figure 25 NAT Mode
The following table describes the labels in this screen.
7.5 Configuring SUA Server
Click NAT, select SUA Only and click Edit Details to open the following screen.
Refer to Table 15 for port numbers commonly used for particular services.
Table 16 NAT Mode
LABEL DESCRIPTION
None Select this radio button to disable NAT.
SUA Only Select this radio button if you have just one public WAN IP address for your Prestige.
The Prestige uses Address Mapping Set 1 in the NAT - Edit SUA/NAT Server Set
screen.
Edit Details Click this link to go to the NAT - Edit SUA/NAT Server Set screen.
Full Feature Select this radio button if you have multiple public WAN IP addresses for your Prestige.
Edit Details Click this link to go to the NAT - Address Mapping Rules screen.
Apply Click Apply to save your configuration.
Note: If you do not assign an IP address in Server Set 1
(default server), the Prestige discards all packets received for
ports that are not specified here or in the remote management
setup.