User's Manual

Prestige 2602RL-D3A Support Notes

Step 4. Check active sip box if you like to use this account and fill in the account information the ITSP

provided you in the SIP setting category. Which will normally include you SIP number, SIP local port, SIP

server address, SIP server port, Register server port, Register server address, SIP service domain.

Step 5. In the Authentication category fill in the User Name and authentication password your ITSP provided to

you.

Step 6. If you wish to send caller ID check the check box in the Caller ID category, if you do not wish to send

out caller ID leave the check box uncheck.

Step 7. Click on Apply to save the setting and take effect. If you would like to configure the 2nd SIP account,

please select SIP2 by using the SIP account selector than follow step 1 to 8 to complete the 2nd account setup.

Each field's detail description on this page is listed below.

Label

Description

SIP

Account

You can configure the Prestige to use multiple SIP accounts. Select one to

configure its settings on the Prestige.

SIP

Number

A SIP account's Uniform Resource Identifier (URI) identifies the SIP account

in a way similar to the way an e-mail address identifies an e-mail account. It is

also known as a SIP identity or address. The format of a SIP identity is

SIP-Number@SIP-Srevice-Domain.

A SIP number is the part of the SIP URI that comes before the "@" symbol.

Enter your SIP number in this field. You can use up to 31 ASCII characters.

SIP Local

Port

Use this field to configure the Prestige’s listening port for SIP. Leave this field

set to the default if you were not given a local port number for SIP.

SIP Server

Address

Type the IP address of the SIP server in this field.

SIP Server

Port

Enter the SIP server’s listening port for SIP in this field. Leave this field set to