DECA Semiautomatic welding machine STARTWIN 135 E

(This text is machine translated) Semi-automatic welding machine DECA STARTWIN 135E performs welding of aluminum and steel in the environment of protective, inert, active gases (Mig / Mag) using any type of wire, including flux-cored wire (0.9 mm self-shielded wire in a 200 gr coil) Operates in the No Gas mode The power consumption of the equipment at 60% is 1.5 kW, the open circuit voltage is 30 V DECA STARTWIN 135E is equipped with current regulation within 30-120 A and can operate in 4 modes Working cycles supported by the DECA STARTWIN 135E semi-automatic welding machine, the following - (105A @ 15%) - (70A@35%) - (50A@60%) The machine is equipped with a 16 A fuse. The following wire diameter is used for welding metals with different characteristics: steel 0.6-0.8 mm; aluminum 0.8 mm, stainless steel 0.8 mm The equipment is equipped with an enhanced forced ventilation system