Eltako Impulse changeover switch DIN rail Eltako ESW12DX-UC 1 maker 230 V AC, 8 V AC 16 A 2300 W 1 pc(s)

1 N/O contact potential-free 16A/250V AC with tungsten feed-contact, 230V-LED lamps up to 600W, incandescent lamps 3300W. Max. Inrush current 500A/2ms. No standby loss. DIN-EN 60715 TH35 DIN rail mounting device. 1 division unit = 18 mm wide, 58 mm deep. Most modern hybrid technology combines the advantages of wear-free electronic control with the high output of special relays. With the patented Eltako-Duplex-Technology (DX) the normally potential-free contacts during switching of 230V-alternating voltage 50Hz can nevertheless switch in the zero crossing and thus the wear and tear can be drastically reduced. Simply connect the N conductor to terminal (N) and L to 1 (L). This results in a standby loss of only 0.1 watts. Universal control voltage 8..230V UC. Low switching noise. No continuous power supply is required, so no loss in standby mode. The use of a bi-stable relay means that even when switched on, there is no coil power loss and no heat up through it. The relay contact can be open or closed upon co...