K&M Large Bearing Plate

The K&M Large Bearing Plate is designed for supporting larger footprint near/midfield studio monitors. With a variety of monitor isolation tools, it is the largest of three different bearing plate sizes offered by K&M for use in conjunction with the K&M 26795 Design Monitor Stand. The K&M Large Bearing Plate is suitable for the Design Monitor Stand 26795. The monitor is not attached to the K&M Bearing Plate, it is only placed on the plate, safety measures must be put in place. Handle the Bearing Plate with care, in particular do not drop it during assembly. Ensure the screws are properly tightened. Be sure that the surface is suitable and level. Ensure concentric load; protect the monitor from shocks and check regularly that it is properly seated. Prior to adjusting or moving the stand remove the monitor from the Bearing Plate. The brass tips represent a risk of injury. Remove from the K&M Bearing Plate when not in use or take protective measure. K&M Large Bearing Plate Features Made of Swiss Steel in Germ...