Wayne CDT50 1/2 HP Submersible Epoxy Coated & Cast Iron Sump Pump w/ Piggyback Tether Float Switch

The CDT50 is a 1/2 HP Submersible Thermoplastic Sump Pump. With a piggyback switch for manual or automatic operation, this pump is also easy to install, start-to-finish in about 15 minutes. Features: Durable epoxy-coated and rugged cast iron construction, for long life in tough sump pump applications High performance; max. flow rate is 5100 Gallons Per Hour; 3840 GPH at 10 ft. of discharge lift Piggy-back tether float switch, for automatic or manual operation; 13 in. ON level and 7 in. OFF level No need for weep holes; Unique Top Suction Design reduces clogging and prevents air lock condition Engineered with Upper and lower ball bearings, in sealed oil bath, for virtually silent operation Designed with Premium John Crane Carbon/Ceramic Shaft Seals for quality that lasts. Cast Iron Seal Plate Prevents Leaks and Galvanic Corrosion 1-1/2 In. NPT Discharge for compliance with building codes 120 V, PSC, Oil-Filled 1/2 HP Motor Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability 8 ft Water...