User Manual

Note:
The working distance for the receiver and solar
LED light is 300m (1000ft) without obstacles.
Always test the working distance between the
solar LED light and receiver before installing these
units.
3.7 Selecting the Alert Mode for the Receiver
a flashing zone LED indicator, or sound and
flashing zone LED indicator together. These are
referred to as Sound, Flash, and Sound+Flash
modes.
To select an alert mode, press the Alert Mode
button to cycle through the modes. Stop pressing
the Alert Mode button when you reach the alert
mode you want to set.
The factory default setting is Sound+Flash mode.
Sound Mode --- Press the Alert Mode button once;
a Beep sound will play but the Zone LED indicator
will not turn on.
Flash Mode --- Press the Alert Mode button twice;
only the Zone LED indicator will turn on.
Sound+Flash Mode --- Press the Alert Mode a third
time; a Beep sound will play and the Zone LED
indicator will turn on. This Alert Mode is the factory
default setting.
Note:
When you do not want to be disturbed or the user
has a hearing problem, we suggest setting the
alarm receiver’s Alert Mode to “Flash” mode.
- 16 - - 17 -
6mm
64mm
When the PIR sensors are triggered, the alarm
receiver can alert you with an auditory sound,