Manualshelf

User Manual

ManualsBrands1 BY ONE ManualsElectronicsSolar Driveway Alarm with Solar LED Lights - Motion Sensor & 2-in-1 Wireless Wall/Landscaping Detector Lights, IP67 Waterproof Outdoor Security Alert System Protect Home, Outside Property
567891011121314
To return the receiver back to default setting, press
and hold the pairing button 3 seconds until a
‘BEEP’ is heard. The receiver will BEEP five times
and the LED indicator will display “8” to indicate
all pairings have been removed from the receiver.
After unpairing, the receiver can be paired again
to a PIR sensor/solar LED light.
- 18 - - 19 -
‘BEEP’
3.9. Change the Volume of the Melody
Press the volume button to change the ringtone’s
volume.
Each press will change the volume to one of six
levels. Stop pressing the volume button your
desired volume level is reached.
3.8 Manufacture Default Settings
If the receiver rings but the PIR sensor has not
been triggered, or the PIR sensor interferes with
another receiver, it may be necessary to wipe
the current pairings and pair again.