User Manual

- 04 - - 05 -
3.2 Power for Solar LED Light
The solar panel on the LED light absorbs sunlight
and converts this sunlight into energy during the
day and stores the energy in the built-in
rechargeable battery to supply power for the
LED light at night or in low brightness
environments.
3.3 Pairing the Solar LED Light with the Receiver
Note:
Now that the solar LED light and receiver are
powered, the solar LED light needs to be paired
with your receiver before the alarm will function.
1. Please fully charger the light before the first time
using it. It takes about 6-8 hours to fully charge.
Turn on solar light after it is fully charged.
2. In order to maximize the lighting effect, please
make sure that the solar light is full of sunlight
electricity.
3. Whether the solar light can produce the best
lighting effect or not depends on sunlight
intensity, geographical location, weather,
season and other factors.
4. It is normal that solar lights outdoors may need
more time (at least 6-8 hours) to charge on cold
or cloudy weather days because there is a lack of
direct sunlight.
5. Turn off the light if it will not be or hasn’t been
exposed to sunlight for 15 days.
Note：Specifications for the power adaptor are below.
Input: 110-120V for US, 220-240V for EU.
Output: DC 5V/6V (Refer to the rating label on the
adapter). Please note that our receiver does not use
rechargeable lithium batteries; all batteries MUST BE
removed from the receiver when being powered by a
power adapter.