User Manual

3.4 Choose an Alarm Melody for the Sensors.
Pairing mode will stay active for 15 seconds
after the sound of the ‘Beep’. If you don’t hear
an alarm/melody sound, repeat the pairing
process and make sure that the selected zone
number is on when you activate the sensor.
Note that only one solar LED light or sensor for one
zone can be paired at a time.
Note:
The alarm melody for Zone 1 can be customized,
while melodies for Zone 2, Zone 3 and Zone 4 are
fixed and cannot be changed.
Zone 1: The alarm melody for Zone 1 can be
selected for among 36 available melodies.
3.5 Installing the Solar LED Light
2-in-1 Function & 2 Installation Options: Stick the
light the ground with stakes or mount on the wall
withthe screws included.
Install the solar LED light on the wall using the
supplied screws:
- 10 - - 11 -
Press the Melody button to cycle through the
available melodies and stop on the desired
melody to select it.
Zone 2: DingDong melody. As the “dingdong”
sound is similar to a doorbell melody, we suggest
the Zone 2 sensor be placed in a low security area
such as the entrance of the garden.
Zone 3: Dripping melody. This also is a nice melody
for a low security area, such as the driveway.
Zone 4: Alarm melody. This sound is tailored for
high security areas. We suggest the sensor for
Zone 4 be placed in areas where trespassing is a
possibility.