Manualshelf

User Manual

ManualsBrands1 BY ONE ManualsElectronicsSolar Driveway Alarm with Solar LED Lights - Motion Sensor & 2-in-1 Wireless Wall/Landscaping Detector Lights, IP67 Waterproof Outdoor Security Alert System Protect Home, Outside Property
12345678910
3.6 Installing the Receiver
3. Please point the sensor towards a open field
(not towards the trees or bushes).
4. Please adjust the PIR sensor on the solar light
so it faces a little downward (never upward).
5. Please point the sensor to the main detecting
area, like the entrance of the driveway or
walkway etc.
The receiver can be placed on any flat indoor
surface or mounted on any type of surface using
the supplied screws.
1. Use a pencil to mark the location of the two
mounting holes on the surface where the
receiver will be installed.
2. Drill out the pilot holes and gently tap the wall
plugs into the pilot holes using a hammer until
the wall plugs are flush with the mounting
surface.
3. Push the screws into the wall plugs, then hang
the receiver on the screws.
- 14 - - 15 -