User Manual
Press the pairing buon and you will hear a ‘Beep’ sound.
- 04 - - 05 -
●
Take off the baery cover from the PIR sensor and insert
3 x AAA baeries. Reaach the baery cover and secure
with the screw.
3xAAA 1.5V
Alkaline Baery
3.3 Paring the PIR sensors with the Receiver
Now that the PIR sensor and receiver are powered, the PIR
sensor need to be paired with your receiver before the alarm
will funcon.
Place the PIR sensor and receiver nearby each other and
ensure the PIR sensor is turned away from you.
A. When the receiver becomes powered, a ‘dingdong’ will
sound to indicate the receiver is on.
B. Press the pairing buon unl the ‘BEEP’ sound plays. The
Zone LED indicator will display the selected zone number.
Press the Melody/Next buon unl the desired zone
number is displayed.
‘BEEP’
Press the Melody/Next buon
The selected zone number will light up
21
3 4