Extensions

Confiture an extension in IPitomy | destinations| Extensions | with the extension number configured in general

settings and, in advanced settings, the password andphone type (Generic) the rest should be default

On the Mitel 5224:

Factory default

a. Press both the up and down keys while applying power to the phone

b. At Network settings press No until Tools & Features appear

c. Press Yes

d. Press No until Restore Defaults appear

e. Press Yes

f. Press Confirm

SIP Mode

a. Press the Super key (blue key) while applying power to the phone

b. At Configure Phone press Yes

c. Press No until Phone Mode appears, Press Yes

d. At Protocol press Yes

e. At Phone Mode Minet press change then press SIP

f. At Store Changes press Yes

g. At reboot now press yes

Access Web GUI for 5224

a. When phone is booted up press the Super key

Mitel_5224_Setup

PAGE 1
Mitel_5224_Setup 1. Confiture an extension in IPitomy | destinations| Extensions | with the extension number configured in general settings and, in advanced settings, the password andphone type (Generic) the rest should be default 1. On the Mitel 5224: 1. Factory default a. Press both the up and down keys while applying power to the phone b. At Network settings press No until Tools & Features appear c. Press Yes d. Press No until Restore Defaults appear e. Press Yes f. Press Confirm 1. SIP Mode a.
PAGE 2
Mitel_5224_Setup b. Press the bottom right feature key on phone set, IP address and MAC address will appear c. Open a web browser and go to the IP address from b. above d. A Logon Window will appear, the User Name is admin the pasword is 5224 e. The following screen appears on login f. The left hand column has links to specific programming pages as well as the firmware load at the top of the page. The firmware on this phone was 04.00.00.07 features and methods may vary with different firmware loads. 1.
PAGE 3
Mitel_5224_Setup b. Insert the IP address of the Ipitomy IPPBX in the: SIP Proxy server, Sip Registry Server, Outbound Server URL, andVoicemail Server fields c. Change Authenticate Mode to Basic d. Click Save and Reboot orApply if more programming is to be done 1. Media Config a. click the Media Config link b. set DTMF type to automatic c. set Media Start Port to 10000 d. set Media End Port to 20000 e.
PAGE 4
Mitel_5224_Setup c.