POGME User Manual (표지)
It is important that you read the user manual before using POGME ! 1. Operating manual “POGME-Blu.” 2. Assembly - During assembly, ensure that the power cord does not fall off. - Only use the adapter provided in the package. Using a 3rd party adapter may cause damage to the product. 3. Caution - While the POGME is in use, make sure that your pet does not lick or chew the power cord. Active current can be lethal to pets. - POGME must be used with a pad in order to prevent low-temperature burns.
Operation Instruction 1. Important safety instructions - Before connecting to power and you begin using POGME, carefully read the guideline and safety instructions written in the user manual, on the product and the power adapter. - Users should always adhere to basic safety instructions when using electrical devices like the POGME. 2.
cause malfunction, explosion and injuries. 18) Unplug the adapter from the outlet before cleaning or maintaining your POGME. 19) Do not plug POGME adapters to extension cables or multi-outlet extension cords. 20) Do not dispose of POGME by incinerating, even if it is severely damaged. Putting POGME and the adapter into fire can cause an explosion. 21) Keep the LCD screen clean from pet’s urine, saliva or water. 22) Do not place pointed or heavy objects exceeding 10kg on POGME. 23) Use POGME only for pets.
Instructions on how to use POGME 1) Confirm contents of the POGME package First, check whether the following components are included in the POGME package: 2) ● POGME smart scale× 1. ● POGME adapter × 1. ● user manual × 1. Power connection and start using · Connect the adapter to the back of the product and then connect it to a power source. · When successfully connected, you will hear a sound “meow, wow, ten people!” (Sound may vary depending on product version).
· Single tap button 2 (△): Daily usage time will be displayed. · Double tap button 3 (○): Turn on/off automatic heating mode. On automatic heating mode, POGME will automatically start heating when your pet steps on it. (over 10g of pressure will activate it). · Single tap button 3 (○): Your pet’s body weight will be displayed · Double tap button 4 (▽): Zero-point calibration. Current weight on POGME will be set as 0.00Kg · Single tap button 1+2 (□+△): You can pre-set your pet’s body weight.
8) Turning off automatic heating mode. · Double tap button 3 (○), and you will hear a notification sound. The LCD screen will display blinking “OFF”. · Wait until the letters on the LCD screen blinks for 4 to 5 times and display “SAVED” with a notification sound. 9) Turning on healing music. · Double tap button 2 (△), and the music will start playing with LCD screen displaying “PLAY”. · While the LCD screen displays “PLAY” for about 4 to 5 seconds, you can adjust the volume by tapping △, ▽ buttons.
● When registering your pet’s body weight, keep off your hands or other subject for proper sensing. Otherwise POGME may sense the wrong weight and may not function appropriately. 13) Time Setting · Tap button 3 and 4 (○+▽) together, and the number indicating hour will start blinking with a notification sound. · Set hours by tapping △, ▽ buttons. · Tap button 1 (□) and the number indicating minutes will start blinking. · Set minutes by tapping △, ▽ buttons.
● ● take a while depending on the situation. Do not put other subjects on POGME when resetting. Only perform factory reset on a flat and stable ground. Note ● “POGME” has built-in Bluetooth connectivity, so you can receive various information when connected with your mobile device. ● In the future, in combination with the Broadp System, you can remote control POGME with your mobile device from anywhere at any time, receive various information, and connect with multiple AI speakers.
Using “POGME” Warnings - When using “POGME” at different locations, always calibrate to zero point again. - POGME should be operated only by people who can ensure safety. - POGME should be operated only on a firm, level and stable place. If not, body weight sensing may not be accurate. When storing, do not put heavy objects on POGME, do not place it on unstable spots in an upright position. - Ensure to turn off heating before disconnecting power.
Accessories 1) Using cushions (not included) · To prevent low-temperature thermal burns, place cushions or blankets of sufficient thickness. Direct contact with POGME may cause low-temperature burns. · Turn off POGME before installing authentic cushion produced by 10pple. · When using dome-shaped cushions, fix it securely with POGME. Do not use POGME with loose dome-shape cushions on it. · Frequently check if cushions are properly placed on POGME.
Using with mobile devices · To connect POGME with your mobile device, use only the mobile application developed by 10pple. · POGME uses Bluetooth connectivity. Stay within 7m(10ft) range to control POGME via mobile app. In case there are obstacles blocking the signal, the range may reduce. · If someone has the 10pple mobile app within the operational range, that person can control your POGME as well. Place your POGME against a thick wall or where it can't be reached by a stranger.
Warranty policy · In accordance with the warranty policy, POGME’s warranty provides repairs for your POGME smart scale, including parts replacement, for one year from the date of purchase. · In case of any inquiries about your POGME product, please contact customer support with your serial number, date and place of purchase ready. Your serial number can be found on the panel on the back of POGME. · You must register the serial number via email.
· All replaced parts belong to 10pple and must be returned. · Repair or replacement under warranty would not extend the term of warranty. · The warranty provides additional benefits and does not affect your legal rights as a consumer. · The warranty benefits are voluntary offer by 10pple in addition to, and not instead of, the rights provided by consumer law and it does not add, exclude, limit or suspend a buyer’s rights arising from consumer law.
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.