User's Manual

11
Accessories
1) Using cushions (not included)
· To prevent low-temperature thermal burns, place cushions or blankets of sufficient thickness. Direct contact with POGME
may cause low-temperature burns.
· Turn off POGME before installing authentic cushion produced by 10pple.
· When using dome-shaped cushions, fix it securely with POGME. Do not use POGME with loose dome-shape cushions on
it.
· Frequently check if cushions are properly placed on POGME. If the cushion is not correctly placed, POGME may not
function properly.
· Do not place wet cushions on POGME. Also, do not alter the original POGME cushion. Do not use contaminated cushions.
· Make sure the cushion is properly aligned, not to cover the LCD screen.
· Calibrate zero point with the cushion placed on POGME so that POGME can accurately measure your pets body weight.
· Regularly wash Original POGME cushion to prevent stain or smudge. Dry cleaning is recommended. In case of hand
washing, use liquid detergent or wool detergent and dry with natural drying. -
2) Using remote control pawmallow (not included)
· Point the original 10pple remote controller straight at the LCD screen of POGME.
· If the LCD screen is covered or the remote controller is not facing the LCD screen directly, the remote may not work.
Performance may reduce from a distance 2.5m(8ft) or more. Use the remote within close range.
· Do not cover the screen on the upper part of the remote control. Avoid deformation or contamination. Use dry cloth to
wipe out any kind of contamination on the screen.
· Do not use the remote with wet or dirty hands. It may cause malfunction.
· Do not point the laser from the remote controller at people or pet’s eyes. It could cause damage to the eyes.
· Do not put the remote controller into a dishwasher, washer, dryer, oven, or microwave.
· Do not put the remote close to fire.
· When not in use for a long time, remove the battery from the remote controller. If there is any form of liquid leak from
the battery, avoid contact with the liquid.
· Do not apply excessive force or disassemble the remote controller.