User's Manual

· Single tap button 2 (△): Daily usage time will be displayed.

· Double tap button 3 (○): Turn on/off automatic heating mode. On automatic heating mode, POGME will automatically

start heating when your pet steps on it. (over 10g of pressure will activate it).

· Single tap button 3 (○): Your pet’s body weight will be displayed

· Double tap button 4 (▽): Zero-point calibration. Current weight on POGME will be set as 0.00Kg

· Single tap button 1+2 (□+△): You can pre-set your pet’s body weight.

· Single tap button 3+4 (○+▽): Time setting mode. Press △, ▽ buttons to adjust time. When connected to your mobile

app, time will be automatically synchronized to your phone).

· Single tap button 1+2+3+4 (□+○+△+▽): Factory reset. Do not use this mode unless it is absolutely necessary. All body

weight settings will be lost and POGME will be unable to measure weights accurately.

5) Turning on Constant Heating mode

· Double tap button 1 (□), and you will hear a notification sound. Constant heating mode icon will turn on and start blinking.

· At the same time, the LCD screen will display the temperature and will blink as well.

· When both the constant heating mode icon and the LCD screen are blinking, adjust the temperature by tapping button 2

(△) and 4 (▽).

· Temperature can be set up to 50°C (122°F).

· After that, wait until the LCD screen blinks 4 to 5 times and displays “SAVED” with a notification sound.

6) Turning off constant heating mode.

· Double tap button 1 (□), and you will hear a notification sound. The LCD screen will display blinking “OFF”.

· Wait until the letters on the LCD screen blink 4 to 5 times and display “SAVED” with a notification sound. Constant heating

mode is off now.

· IMPORTANT: Heating will automatically stop when the surface gets hotter than the preset temperature, and it will start

again when the surface becomes cooler than the preset temperature.

7) Turning on automatic heating mode.

· Double tap button 3 (○), and you will hear a notification sound. Automatic heating mode icon will turn on and will start

blinking. Also, the numbers on the LCD screen will start blinking showing the preset temperature.

· When you see the automatic heating mode icon blinking, adjust to your ideal temperature using either △, ▽ button.

· After that, wait until the numbers on the LCD screen blinks for 4 to 5 times and displays “SAVED” with a notification sound.

Important: In case you have more than one pet at your house, Automatic heating mode will only recognize the registered

ones.