User's Manual

8) Turning off automatic heating mode.

· Double tap button 3 (○), and you will hear a notification sound. The LCD screen will display blinking “OFF”.

· Wait until the letters on the LCD screen blinks for 4 to 5 times and display “SAVED” with a notification sound.

9) Turning on healing music.

· Double tap button 2 (△), and the music will start playing with LCD screen displaying “PLAY”.

· While the LCD screen displays “PLAY” for about 4 to 5 seconds, you can adjust the volume by tapping △, ▽ buttons.

Volume level will be displayed on the LCD screen on a scale of 1 to 9.

· After that, wait for the LCD screen to blink for 4 to 5 times and display basic information.

10) Turning off healing music

· Double tap button 2 (△), and the music will stop playing with LCD screen displaying “STOP”.

· When you see the “STOP” sign on the LCD screen, wait until it blinks 4 to 5 times and displays basic information.

11) Calibrating zero point

· Double tap button 4 (▽), and the LCD screen will display “SET” with a notification sound.

· Wait for about 1 to 2 seconds until the LCD displays “INIT” and starts blinking.

· Now, POGME will recognize all the weight on it as zero point including cushions or toys. (Important. Do not touch POGME

when the LCD screen displays INIT).

· Wait for about 2 to 3 seconds until the LCD screen displays basic information.

12) Registering pet’s body weight

· Tap button 1 and 2 (□+△) together, and the LCD screen will display “SET” with a notification sound.

· Wait for about 1 to 2 seconds until the display changes from “SET” to numbers and starts to blink.

· Then put your pet on POGME and the body weight will be automatically registered.

· When properly registered, the LCD screen will display basic information in 2 to 3 seconds.

Important:

● Body weight registration is required in order to distinguish between sleeping time and relaxing time.

● In order to use automatic heating mode via your mobile device, the pet’s body weight must be registered. In

case you have more than one pet, only registered pets will activate the heating.

● In order to use health care mode, the pet’s body weight must be registered. In case your pet needs health care

mode, only the registered pets health data will be collected.

● In case you need to register body weights of more than one pet, POGME may not distinguish them if their body

weights are less than 1kg apart.