Installation & Assembly

Rod mount fixture: Usetheswivel included or the swivel from your fixture kits. Do not

useplasticconnectors.

Cord mount fixture: Usetheplasticconnectors included or use the plastic connectors from your

fixture kits. Do not use theswivels.

1-Fasten mounting plate to the outlet box and to the building structure at ends of the mounting

plate prevent sagging.

2-Estimate height of fixtures and rods or cord needed to achieve this height.

3-Follow fixture directions for cord or rod preparation and installation.

4-For Rod installation fasten swivel to top of rod set.

5-thread wires or cord through the face plate of the ceiling plate.

6-prepare wires and connect them to building wiring as per instructions included with fixture

kits.

7-Once wire connections are finished carefully tuck in wires and lift the face plate up to slide

onto the two studs sticking down allowing them to protrude through the face plate.

8-Fasten the faceplate to the two studs protruding through it with the cylinder nuts.

Swivel

Rods

Plastic

Connector

Cord

PAGE 1
Plastic Connector Swivel Cord Rods OR Rod mount fixture: Usetheswivel included or the swivel from your fixture kits. Do not useplasticconnectors. Cord mount fixture: Usetheplasticconnectors included or use the plastic connectors from your fixture kits. Do not use theswivels. 1-Fasten mounting plate to the outlet box and to the building structure at ends of the mounting plate prevent sagging. 2-Estimate height of fixtures and rods or cord needed to achieve this height.
PAGE 2
Assembly and Installation Instruction Warning!!! Shut Power Off At Fuse or Circuit Breaker . 1. Carefully unpack your new fixture and lay out all the parts on clear area. Take care not to loose any small parts necessary for installation. 2. This fixture include three sizes of pipe: (3"X 1pc, 6"X 1PC, 12" X 3PCS) to be connected into various height. Choose desired installation height and thread fixture wires through each pipes to be used. Screw all pipes together until secure. 3.