UNIT WEIGHT: 27" (9.35 lb) 33" (10.
Fastening System Each and every piece of our furniture uses a simple, yet effective fastening system to quickly assemble & adjust. The premise behind the system is the use of a set screw that "clamps" on to each pipe trapping it in place . Each fitting has a pre-inserted set screw at EACH pipe entry location (spare set screws are provided).
12.00 1.00 VARIES* (27", 33") 14.00 VARIES* (20.5", 26.
DISCLAIMER: We intend to make this instruction manual accurate and complete. However, we make no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
[x1] Shelf [x2] Flange 2 1 [x2] Cap [x1] Left Upper Support 3 [x1] Right Upper Support 5 4 [x1] Left Lower Support [x1] Right Lower Support 6 7 NOTE: SMALL ADJUSTMENTS MAY BE NEEDED ON SUBASSEMBLIES DUE TO SHIPPING MOVEMENT 5
[x1] Hanger Assembly [x1] 1/8" Allen Key Smaller Key 8 9 [x1] 1/4" Allen Key Larger Key [x4] Ø8mm X 40mm lg.
4 1 5 1 USEPART 9 & TIGHTEN NEW CONNECTIONS 6 7 2 From Step 1 8 USEPART 9 & TIGHTEN NEW CONNECTIONS 7
USE PART 9 & TIGHTEN NEW CONNECTIONS 3 2 3 2 3 FROM STEP 2 4 IMPORTANT: TO INSURE PROPER AND SAFE INSTALLATION OF YOUR SHELF; YOU MUST: 1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL WHILE LINING EITHER THE RIGHT OR LEFT FLANGE WITH A WALL STUD. 2. LIGHTLY MARK YOUR WALL USING A PENCIL THROUGH THE FLANGE HOLES. (4 MARKS NEEDED TOTAL). 3. REMOVE UNIT FROM WALL AND PREDRILL YOUR 4 MARKED SPOTS USING A 3/16" DRILL BIT. IF NOT GOING DIRECTLY INTO STUD, USE ANCHOR (ITEM 9).
WARRANTY Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood -1 Year Limited Warranty- All metal finishes and other parts and components, excluding wood, are warranted to you, the original retail purchaser, for a one-year period starting from the date of purchase, to be free from material manufacturing defects.
