UNIT WEIGHT: 18" (4 lbs) 24" (5 lbs) 30" (6 lbs) WEIGHT CAPACITY PER SHELF/TIER: 15 LB Decorative Shelf
Fastening System Each furniture design utilizes a simple & effective fastening system to quickly assemble your unit. To reduce assembly time, each fitting (connector) has pre-installed set screws (spare set screws are provided) at EACH pipe entry location. Set screws are tightened using a 1/8” Allen Key, which safely secures the pipe in place.
10.00" 4.00" VARIES* (18", 24", 30") 1.
DISCLAIMER: We intend to make this instruction manual accurate and complete. However, We make no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
[x1] Shelf Assembly [x2] Flange 1 2 [x2] Cap [x1] 1/8" Allen Key 3 4 [x4] Ø8mm X 40mm lg.
1 3 1 USE PART 4 & TIGHTEN THE CAP'S SET SCREWS [x2] 6
2 IMPORTANT: TO INSURE PROPER AND SAFE INSTALLATION OF YOUR SHELF; YOU MUST: 1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL LINING AT LEAST ONE SIDE UP WITH A STUD. 2. REMOVE UNIT FROM WALL AND PREDRILL YOUR 4 MARKED SPOTS USING A 3 " DRILL BIT 16 IF NOT GOING DIRECTLY INTO STUD, USE ANCHOR (ITEM 7). DRILL 5 " HOLE AND HAMMER 16 ANCHOR INTO PLACE. 3. PLACE UNIT BACK ON WALL AND INSERT SCREWS (ITEM 6) INTO FLANGES & TIGHTEN USING ITEM 5. DO NOT OVER TORQUE.
WARRANTY Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood -1 Year Limited Warranty- All metal finishes and other parts and components, excluding wood, are warranted to you, the original retail purchaser, for a one-year period starting from the date of purchase, to be free from material manufacturing defects.