UNIT WEIGHT: 27" (8 lb) 33" (9 lbs) WEIGHT CAPACITY PER SHELF/TIER: 25 lb SHELF RACK
Fastening System Each furniture design utilizes a simple & effective fastening system to quickly assemble your unit. To reduce assembly time, each fitting (connector) has pre-installed set screws (spare set screws are provided) at EACH pipe entry location. Set screws are tightened using a 1/8” Allen Key, which safely secures the pipe in place.
12.00" 10.69" 4.50" 1.00" VARIES* (27", 33") 22.12" 14.00" 5.00" VARIES* (20.5", 26.
DISCLAIMER: We intend to make this instruction manual accurate and complete. However, We make no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
[x1] Shelf [x2] Flange 2 1 [x2] Cap [x1] Left Upper Support 3 [x1] Right Upper Support 5 4 [x1] Left Lower Support [x1] Right Lower Support 6 7 NOTE: SMALL ADJUSTMENTS MAY BE NEEDED ON SUBASSEMBLIES DUE TO SHIPPING MOVEMENT 5
[x1] Rack Assembly [x1] 1/8" Allen Key Smaller Key 8 9 [x1] 1/4" Allen Key Larger Key [x4] Ø8mm X 40mm lg.
4 5 1 1 6 USE PART 9 & TIGHTEN NEW CONNECTIONS 7 2 From Step 1 8 USE PART 9 & TIGHTEN NEW CONNECTIONS 7
USE PART 9 & TIGHTEN NEW CONNECTIONS 3 2 3 FROM STEP 2 4 IMPORTANT: TO INSURE PROPER AND SAFE INSTALLATION OF YOUR SHELF; YOU MUST: 1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL WHILE LINING EITHER THE RIGHT OR LEFT FLANGE WITH A WALL STUD. 2. LIGHTLY MARK YOUR WALL USING A PENCIL THROUGH THE FLANGE HOLES. (4 MARKS NEEDED TOTAL). 3. REMOVE UNIT FROM WALL AND PREDRILL YOUR 4 MARKED SPOTS USING A 3 " DRILL BIT. 16 IF NOT GOING DIRECTLY INTO STUD, USE ANCHOR (ITEM 12).
WARRANTY Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood -1 Year Limited Warranty- All metal finishes and other parts and components, excluding wood, are warranted to you, the original retail purchaser, for a one-year period starting from the date of purchase, to be free from material manufacturing defects.