ASSEMBLY INSTRUCTION Computer Desk
Wi t h2hol esup
Ste P O 1 NOTE: DO NOT fully tighten all bolts at this step. ' Lay the Table Top(W) upside down onto a clean smooth surface such as carpet or cardboard. Align and fix two table legs(@)to the Table Top(W) with 8 pcs Screws(B) by Allen Key(A).Do not fully tighten all bolts until all parts are in place. With 2 holes With 2 holes Step 02 NOTE: DO NOT fully tighten all bolts at this step. Fasten Metal Legs(@) to the Back Shelf(®) by using four Long Bolts(C) with Allen Key(A).
Step 03 NOTE: DO NOT fully tighten all bolts at this step. ' Fasten Metal Legs(@) to the Level Shelf(@) by using four Long Bolts(C) with Allen Key(A). With 2 holes Ste P 04 NOTE: If holes don't align, loosen all bolts and adjust the holes slightly. After all holes are aligned, fully tighten all bolts. 2.1 Fasten Level Shelf(@) to the Back Shelf(®) by using two Short Bolts(D) with Allen Key(A). 2.2 Tighten all bolts when all parts are in place.Flip the desk upright with the help of another person.
