Instruction manual

ManualsBrands180s Manualscomputers & electronicsGen 2 Bluetooth

180s Hi-Def BTH Instruction Manual

Introduction

Thank you for purchasing the 180s Hi-Def BTH Bluetooth® Ear Warmer! You now own the most

innovative ear warmer on the planet! You can talk on the phone and listen to music in high definition

from your Bluetooth enabled device. On top of that, the patented behind-the-head design is stylish and

comfortable as it surrounds your ears in warmth! So charge it up, call your friends, and treat your ears

to your favorite tunes all while staying warm!

Included in the box

1x 180s Hi-Def BTH Bluetooth® Ear Warmer

1x USB charging cable

1x User instruction manual

Charging Your 180s Hi-Def BTH

Your Hi-Def BTH Bluetooth Ear Warmer will need to be fully charged before first use. You will not be

able to use it during the charging period. To charge your Hi-Def BTH, locate the 3.5mm connector inside

the seam of the lining on the right ear piece (the same side that contains the Bluetooth unit) and plug

the 3.5mm jack end of the USB charging cable into it (see fig. 1). Then plug the USB end of the charging

cable into the USB port on your computer or other USB power source. The power button on the Hi-Def

BTH will illuminate red to indicate that the device is charging. Once charging is complete (will take

about 3.5 hours for full charge), the red light will turn off. Unplug the charging cable and you are ready

to use your Hi-Def BTH!

Battery Life

- Charging time: about 3.5 hours

- Up to 9 hours of talk time on a full charge

- Up to 8 hours of listening time on a full charge

- Up to 100 hours of standby time on a full charge

Power On/Off

To turn on your Hi-Def BTH, locate the power button/indicator light at the center of the right ear piece.

Press and hold the button down for 5-6 seconds. The indicator light will flash red once ton indicate the

device is on, then will flash blue. To turn off, hold the button down for 5-6 seconds. The indicator light

will flash red once to indicate that the device has turned off.

Summary of content (4 pages)

PAGE 1
80s Hi-Def BTH Instruction Manual Introduction Thank you for purchasing the 180s Hi-Def BTH Bluetooth® Ear Warmer! You now own the most innovative ear warmer on the planet! You can talk on the phone and listen to music in high definition from your Bluetooth enabled device.
PAGE 2
Pairing with Another Device To make calls or listen to music using your Hi-Def BTH, you must first pair it with your Bluetooth® enabled smart phone, tablet, or computer. To pair Hi-Def BTH with a phone/tablet/computer, follow these steps: 1. Turn off all other paired Bluetooth devices. 2. Turn phone/tablet/computer Bluetooth function on and set to “Pair” or “Search for new devices” . 3. With power off, hold Hi-Def BTH power button down for 8-10 seconds until indicator light flashes blue and red rapidly. 4.
PAGE 3
Care and Maintenance - When not in use, store your Hi-Def BTH in a dry, room temperature place. Do not store your HiDef BTH in a parked car where extreme temperatures may occur Do not subject to extreme cold or heat for extended periods of time Spot clean ONLY with a cloth and mild soap/water solution.
PAGE 4
Use of Non-180s Products and Accessories. Defects or damage that result from the use of non-180s branded or certified Products, Accessories, or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than 180s are excluded from coverage. Altered Products.