User Manual

CARE & CLEANING
Storage:
Unplug the appliance. Make sure that the Cooker Base, Heating disk, Inner pot, Lid, Steam Release handle,
and Condensation Collector, Basket，Rack are dry and clean. You may store all additional accessories inside
the Removable Inner Pot for easy and compact storage. Store on a at, dry level surface out of reach of
children.
Remove and install the Steam Release Valve
Removal: Simply lift it up.
Installation: Place the handle in the opposite direction of the Float Valve, then push down. The Steam
Release Valve will t loosely instead of being locked tightly.
Remove and install the Anti-Block Shield
Removal: Grip on either side and pull up.
Installation: Press it rmly back into place
Remove and Install the Sealing Ring
Removal: While holding the Lid in place, gently pull out the Sealing Ring.
Installation:
1. Line up the Sealing Ring on top of Ring Rack.
2. Gently push down on the Sealing Ring, ensuring that the metal Ring Rack is inside the Sealing Ring’s
groove as shown below. Continue pushing the Sealing Ring all around until it is secured by the metal
Ring Rack.
Anti-block Sheild is
properly placed
Anti-block Sheild is
removed
Pull on side to remove
Sealing Ring is placed
correctly into RIng Rack
Gently pull out the Sealing
Ring section by section
26